Service manual

10 of 22 BII 45421 (1103) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.
32. Using isopropyl alcohol on a shop towel, clean the
area where the urethane tapes will attach.
33. Using scissors, cut one urethane tape in half. Secure
the antenna cable to the roof panel with the two
halves of urethane tape.
34. Secure the antenna cable to the vehicle harness with
six wire ties.
830625AT
ANTENNA
CABLE
ROOF PANEL
(Clean with
isopropyl alcohol.)
2 URETHANE
TAPE HALVES
URETHANE
TAPE
(Cut in half.)
830626AT
6 WIRE TIES
ANTENNA
CABLE
VEHICLE
HARNESS
35. Pull away the door opening trim from the left front
A-pillar. Route the antenna cable down next to the
dashboard, and tuck the antenna cable between the
left front A-pillar and the dashboard. Reinstall the
door opening trim.
36. Route the antenna cable along the vehicle harness
as shown.
830627BT
ANTENNA CABLE
LEFT FRONT
A-PILLAR
DASHBOARD
DOOR OPENING TRIM
830628CT
ANTENNA
CABLE
VEHICLE
HARNESS