Service manual

26 of 30 BII 13404 (1301) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
REMOTE ENGINE STARTER REGISTRATION
1. Acquire the PCM Code from the Interactive Network.
2. Connect the HDS/MVCI tester to the OBD II data link
connector, then turn the ignition switch to the on (II)
position.
3. Start the HDS, and click the car icon.
4. Input the VIN and other required information into the
HDS, then click the check button.
QB00999AH
CAR ICON
QB32102BH
Input the VIN and other
required information.
CHECK BUTTON
5. Select Honda Systems, then click the check button.
6. Select R/C ENG STARTER and click the check
button.
QB32103AH
Select
“Honda Systems.”
CHECK BUTTON
QB32104AH
Select
“R/C ENG STARTER.”
CHECK BUTTON