Service manual

24 of 30 BII 13404 (1301) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
79. Route the antenna cable under the dashboard as
shown. Secure the engine starter harness and the
antenna cable to the instrument panel with one wire
tie.
80. Secure the antenna cable to the engine starter
harness with one wire tie.
81. Continue routing the antenna cable under the
dashboard, and secure the engine starter harness
and the antenna cable to the hole in the vehicle
frame with one wire tie.
QB51036AH
INSTRUMENT
PANEL
ANTENNA
CABLE
2 WIRE
TIES
ENGINE STARTER
HARNESS
QB51037AH
ANTENNA
CABLE
HOLE
VEHICLE
FRAME
WIRE TIE
ENGINE STARTER
HARNESS
ANTENNA
CABLE
82. Wrap one urethane tape around the engine starter
harness and the antenna cable in the location
shown.
83. Plug the antenna cable connector into the control
unit.
QB51038AH
ANTENNA
CABLE
ASPIRATO
R HOSE
ENGINE STARTER
HARNESS
URETHANE TAPE
QB51039AH
ANTENNA CABLE
CONNECTOR
CONTROL
UNIT
FRONT
CENTER
CONSOLE