Service manual

51. Secure the engine starter harness to the vehicle

harness with one wire tie.

52. Reinstall the driver’s dashboard lower cover.

Reconnect the negative cable to the battery, then

press the engine start/stop button to select the ON

mode.

NOTE:

• Make sure that the engine starter harness is not

stretched.

• Make sure that the connectors and harness are not

pinched, or are not interfering with the steering wheel

when it is moved for adjustment.

QB51014CH

ENGINE

STARTER

HARNESS

WIRE

TIE

FRONT

VEHICLE

HARNESS

Do not pull the 10-pin

connector cord too tight.

Do not pull the 12-pin

connector cord too tight.

53. Press the engine start/stop button to select OFF

mode, then disconnect the negative cable from the

battery. Remove the driver’s dashboard lower cover.

NOTE: The steering wheel automatically moves fully

in and up. Make sure that the steering wheel is not

interfering with the vehicle parts.

54. To gain access to the engine starter harness 12-pin

connector, loosen one nut and two bolts from the

vehicle bracket, and move the vehicle bracket.

QB40101AH

FRONT

2 BOLTS

(Loosen.)

NUT

(Loosen.)

VEHICLE

BRACKET

FUSE BOX