Service manual

© 2013 American Honda Motor Co., Inc. – All Rights Reserved. BII 13404 (1301) 13 of 30
41. Install the control unit bracket to the control unit.
42. Secure the control unit bracket to the vehicle frame
with two flange nuts.
QB51006AH
CONTROL
UNIT
CONTROL UNIT
BRACKET
QB51007AH
FRONT
2 FLANGE
NUTS
VEHICLE
FRAME
CONTROL
UNIT
BRACKET
CENTER
CONSOLE
43. Under the driver’s dashboard, locate and remove the
cap from the stud.
44. Secure the relay bracket to the stud with one washer
nut, and reinstall the cap.
QB51008BH
CAP
FRONT
STUD
QB51009BH
CAP
(reused)
RELAY
BRACKET
WASHER
NUT
STUD