2012 RL Navigation Manual (Unlinked) This document does not contain hyperlinks and may be formatted for printing instead of web use. This is due to changes in content and specifications of the vehicle that happen throughout the model year. This manual will be replaced with a hyperlinked version at the end of the model year. © 2011 American Honda Motor Co., Inc.
00 ACURA_RL_KA.book 1 ページ ２０１１年８月２６日 金曜日 午後５時８分 Table of Contents Introduction ..................................4 Manual Overview ............................4 System Overview ............................4 Accessories Precautions ..................5 Important Safety Information ..........5 Map Overview .................................6 Traffic Display Legend..................22 AcuraLink Real-Time Traffic™....23 Traffic Status Indicator.................... 23 Viewing Flow Data ......................
00 ACURA_RL_KA.book 2 ページ ２０１１年８月２６日 金曜日 午後５時８分 Table of Contents EXIT INFO (Freeway Exit Information).......... 60 Guidance Mode ............................61 Map Scale ......................................62 Map Orientation ...........................63 Destination Icon ............................63 Various Other Icons.......................64 Landmark Icons .............................. 64 Incident Icons ................................. 64 Weather Icons .................................
00 ACURA_RL_KA.book 3 ページ ２０１１年８月２６日 金曜日 午後５時８分 Table of Contents Edit Waypoint Search Area .......... 108 Guidance Mode ............................. 109 Clock Adjustment .......................110 Auto Daylight ................................ 110 Auto Time Zone ............................. 111 Daylight Savings Time (DST) Selection (Change DST Schedule) ............. 111 Time Adjustment ........................... 111 Vehicle.........................................112 Off-road Tracking ..........
00 ACURA_RL_KA.book 4 ページ ２０１１年８月２６日 金曜日 午後５時８分 Introduction Manual Overview The back of this manual contains: System Overview The manual is divided into the following sections: • Map Coverage (page 129) Your navigation system is a highly sophisticated location system with voice control that uses satellites and a map database to show you where you are and to help guide you to a desired destination.
00 ACURA_RL_KA.book 5 ページ ２０１１年８月２６日 金曜日 午後５時８分 Introduction The navigation system applies location, direction, and speed information to the maps and calculates a route to the destination you enter. As you drive to that destination, the system provides map and voice guidance. The navigation system is easy to use. The locations of many places of business and entertainment are already entered in the system. You can select any of them as a destination by using the Interface Dial or voice control.
00 ACURA_RL_KA.book 6 ページ ２０１１年８月２６日 金曜日 午後５時８分 Introduction WARNING Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed. Only operate system controls when the conditions permit you to safely do so. While driving, do not look at the screen or operate the system controls for more than a second or so at a time, and only after deciding you can do so safely.
00 ACURA_RL_KA.book 7 ページ ２０１１年８月２６日 金曜日 午後５時８分 Introduction Verified streets (dark colored) Unverified streets (light colored) When displayed These roads are found within metropolitan areas, and include interstate freeways and major roads connecting cities. These roads are found in rural areas, and typically include residential streets away from the center of a town. Street color Shown on daytime map screen as black or red, such as interstate freeways.
00 ACURA_RL_KA.book 8 ページ ２０１１年８月２６日 金曜日 午後５時８分 User Agreement In using this DVD “Satellite Linked Navigation System” (the “DVD”), which includes HONDA MOTOR CO., LTD. software, ALPINE ELECTRONICS, INC. software, NAVTEQ database contents, INFO USA CORPORATION database, ZAGAT SURVEY database contents, and ZENRIN CO. database contents (hereinafter referred to as “Licensors”), you are bound by the terms and conditions set forth below.
00 ACURA_RL_KA.book 9 ページ ２０１１年８月２６日 金曜日 午後５時８分 User Agreement • The terms and conditions hereof apply to all subsequent users and owners as well as to the original purchaser. • The logos of oil companies, hotels, convenience stores, and other businesses are displayed for your information and convenience, and in no way imply any sponsorship, approval or endorsement of these companies, or their products. The logos are trademarks of their respective owners.
00 ACURA_RL_KA.book 10 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started System Controls Driver’ss Temperature Driver Passenger’s Temperature Audio Functions MAP/GUIDE button Displays the map. When en route, switches between the map and guidance screens. See page 20 or 57. AUDIO button Press to display the audio screen. Upper Display For more information on audio system features, see the Audio section of your Time (set by Navigation system) syste Owner’s Manual.
00 ACURA_RL_KA.book 11 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started SET UP button Displays the SETUP screen where you can customize information in the system. See page 92. Interface Dial/ENTER button Knob ENTER When you are displaying a map, rotating the Interface Dial knob allows you to change the scale. Rotating it clockwise reduces the scale, showing less area with greater detail. Rotating it counterclockwise increases the scale, showing more area with less detail.
00 ACURA_RL_KA.book 12 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Screen All selections and instructions are displayed on the screen. The Display is not a “touch screen” - you enter information into the system either by voice or by using the Interface Dial. Upper Display Shows a summary of the audio and climate control information, as well as the time. This summary is helpful as a confirmation when adjusting audio or climate by voice. Clean the screen with a soft, damp cloth.
00 ACURA_RL_KA.book 13 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Voice Control Basics Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. You can also control the audio and climate control system. The voice control system uses the NAVI TALK and NAVI BACK buttons on the steering wheel and a microphone near the map light on the ceiling.
00 ACURA_RL_KA.book 14 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Using the Voice Control System You should use the voice control system as much as possible, and consider manual entry using the Interface Dial as a backup method of entry. Most of the system’s functions can be controlled by voice commands activated with the NAVI TALK button. To control the navigation system by voice: • Press and release the NAVI TALK button. • Wait for the beep (the is displayed on the top left of the screen).
00 ACURA_RL_KA.book 15 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started • If more than one person is speaking at the same time, the system may misinterpret your command. • After pressing and releasing the NAVI TALK button, wait for the beep, then give a voice command while is displayed on the top left of the screen. • Give a voice command in a clear, natural speaking voice without pausing between words. • If the system cannot recognize your command because of background noise, speak louder.
00 ACURA_RL_KA.book 16 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Entering Information When the system needs input from you, the display changes to a screen similar to the one at the right. You can then use the displayed letters, numbers, or symbols to enter information. You can enter your keyboard input in either of the following ways: • Say the desired letter, number, or symbol on the screen if you are entering a City or Street name.
00 ACURA_RL_KA.book 17 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started System Start-up When you turn the ignition to ON (II), it takes several seconds for the navigation system to boot up. The first screen to appear is the navigation system globe screen. The screen then changes to the Disclaimer screen: Read this disclaimer carefully so you understand it before continuing. Push in on the Interface Dial to select OK, and the map screen will appear on the display. The “OK” cannot be activated by voice.
00 ACURA_RL_KA.book 18 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started If you press the CANCEL button, the message will be displayed the next time you start the vehicle. NOTE: The system will display the current message and any older or previously unread messages, with the newest message listed first. Bluetooth® HandsFreeLink® If you have a Bluetooth-compatible cell phone that is paired, then CALL on the Calculate route to screen is enabled.
00 ACURA_RL_KA.book 19 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started The navigation system uses the driver number (as recognized by the MID) to personalize the navigation system. For example, if Driver 1 unlocks the vehicle, the “Driver 1” Personal Address Book and other navigation settings are automatically loaded when the vehicle is started. There is no way to change from one driver’s settings to the other’s while driving.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 21 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Map Screen Description Zoom In/Out Rotate the Interface Dial knob to change the map scale. Zooming in increases the detail, while zooming out gives you a wide area view. After changing the scale, give the system a few moments to update the display. Map Scrolling To view other map areas, move the Interface Dial left, right, up, or down. The map will shift in that direction.
00 ACURA_RL_KA.book 22 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Traffic Display Legend Hearing Incident Details: To have the message read to you, push in on the Interface Dial a second time. Viewing Incident Details: To view the incident details, use the Interface Dial to position the cursor (round red circle) over an incident icon and push in.
00 ACURA_RL_KA.book 23 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started AcuraLink Real-Time Traffic™ The navigation screen can display upto-the-minute traffic information when available, including flow (traffic speed), accidents, and construction on freeways in more than 40 major metro areas. See page 143 for a list of the current U.S. cities that offer traffic information.
00 ACURA_RL_KA.book 24 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Viewing Flow Data Traffic flow data is displayed as colored bands on either side of the freeway (see Traffic Display Legend on page 22). The different colored bands represent the average road speeds as determined by “under-road sensors.” Naturally, only roads with these sensors will show traffic information. The amount of flow data varies considerably from one city to another. This map display is refreshed continuously.
00 ACURA_RL_KA.book 25 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started Viewing Incident Reports Incident reports appear as small diamond or circle-shaped icons (see Traffic Display Legend on page 22 for examples). There are four ways to view traffic incidents: • By voice control, say “Display traffic incidents.” • Select “Traffic Incidents” from the Map menu. • Select “Traffic Incidents” on the INFO screen (Main Info). • Select an incident icon from the map screen.
00 ACURA_RL_KA.book 26 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started No Traffic Incidents If you say “Display traffic incidents” or select Traffic Incidents, but there are no incidents around your current location, the following screen will be displayed. 26 Selecting an Incident Icon from the Map Screen Zoom in or out so that you are between the 1/20 and 5 mile scales. (The map must be on the 1/20 to 5 mile scales to view the incident icons.
00 ACURA_RL_KA.book 27 ページ ２０１１年８月２６日 金曜日 午後５時８分 Getting Started GLO THE DISCL AI VIEW TRAFFIC (pg. 23) ADD BOOK (pg. 95) PINs (pg. 99) UNITS MI/KM (pg. 101) AUTO VO RO L. (pg. 10 GUIDUTING 1) UNVE RIFIE ANC D E (pg. 1 TFC 02) R AD CLO (pg. EROUTIN 73, 1 JU CK AVO 06) G ST ID A ME REA TIM NT S (p VE EZ g. 1 ON AD HI 06) E J. T CL DA IME (pg. 1 E YL CO 11) IG (pg OF HT LO . 11 F S -R 1) R AV . (p C (pgOAD g. . 7 TR P OR 11 0, A 1) M OS RE 11 CK M AP ITI CT 2 I N ) EN G CO ON VE U (p HI g.
00 ACURA_RL_KA.book 28 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination When you press the MENU button, the display changes to: NOTE: If you press the MENU button while en route, the MENU screen (Route) will be displayed. To enter the destination, select the “Enter destination by” tab by moving the Interface Dial to the left. Address (see page 29) This selection requires you to enter the city (and possibly the state) and the address that you want to go to.
00 ACURA_RL_KA.book 29 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination By Address After you select Address from the MENU screen (Enter destination by), the display changes to: Tip: • When entering an address by voice, it is more efficient to say the city name first, then the street name. • When entering an address by the Interface Dial, it is usually easier to enter the street first. A city or cities that the street appears in will be displayed.
00 ACURA_RL_KA.book 30 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination To enter the city name by voice spelling, say or select CHANGE TO SPELL MODE on the Say city name screen, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time. The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you.
00 ACURA_RL_KA.book 31 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination If the system does not find an exact match, select LIST when you finish entering the name of the city. Most of the cities and towns for that state are listed. Listings of cities and towns in the nondetailed coverage area may have an asterisk “*” next to their names. If you select one, a pop-up box is displayed saying, “No detailed street data...”, and a street address cannot be entered (see Map Coverage on page 129).
00 ACURA_RL_KA.book 32 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you.
00 ACURA_RL_KA.book 33 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Entering the Street Number After you have completed the street name, the display changes to the Enter street number screen. Use the voice control system and say the address number as a continuous string of numbers. For example, the address 1527 should be spoken as “One, five, two, seven.” You can also use the Interface Dial to enter the street number. Some address numbers may not be available on the selected street.
00 ACURA_RL_KA.book 34 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Scroll through the list to find your desired destination. After you select it, the system then displays the Calculate route to screen (see Driving to Your Destination on page 52). Tip: If you select New Address in the list, you can store a new address in the personal Address Book.
00 ACURA_RL_KA.book 35 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination • The second best method is to select Category, Restaurant, and CAFÉ/ COFFEE SHOP. After you select Place Name by Keyword and search method, enter the keyword “Bucks.” The list will include all restaurants that have the letters “bucks” anywhere in the name.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 37 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Finding a restaurant The ZAGAT SURVEY for some restaurants is available in the system. See the INFO screen (Other), “Key to Zagat Ratings” for an explanation of these ratings (see page 90). By voice, select the tab by saying “Zagat list number X” (where X is the line number 1-3). Alternatively, use the Interface Dial to first select the line item, and move the dial to the right to view the survey.
00 ACURA_RL_KA.book 38 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Place Name by Keyword If you do not know the exact name of the destination, you can find the place with a keyword. When you select this option, the display changes to: You can find your destination with a keyword using the Sort by Distance to Travel option or City Vicinity option. If you select the Sort by Distance to Travel option, the Enter keyword for place screen appears. Enter the keyword using the Interface Dial.
00 ACURA_RL_KA.book 39 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination City Vicinity The system allows you to find points of interest in the vicinity of the city you entered. When you select this option, the display changes to the Enter city name screen. Enter the name of the city using the Interface Dial. If the system does not find an exact match, select LIST when you finish entering the name of the city. Select a desired city from the list.
00 ACURA_RL_KA.book 40 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Finding the Place by Zagat 2011 The ZAGAT 2011 option allows you to find a restaurant by the Zagat Rating information. The system lets you select the metro area, neighborhood, and food type to search the restaurant you like. After you select the food type, the following display appears: Name - When you select Name, the restaurants will be listed by alphabetical order.
00 ACURA_RL_KA.book 41 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination By Intersection After you select Intersection from the MENU screen (Enter destination by), the display changes to: Tip: When entering an address, it is usually easier to enter the street first. A city or cities that the street appears in will be displayed. For your convenience, you do not have to enter both city and street. NOTE: • If you find that your city is not listed, it may be part of a larger metropolitan area.
00 ACURA_RL_KA.book 42 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination To enter the city name by voice spelling, say or select CHANGE TO SPELL MODE on the Say city name screen, and the display will change to the Enter city name screen. Say the city name by saying individual letters, or words that represent the letters, one at a time. The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you.
00 ACURA_RL_KA.book 43 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination If the system does not find an exact match, select LIST when you finish entering the name of the city. Most of the cities and towns for that state are listed. Listings of cities and towns in the nondetailed coverage area may have an asterisk “*” next to their names. If you select one, a pop-up box is displayed saying, “No detailed street data...”, and a street address cannot be entered (see Map Coverage on page 129).
00 ACURA_RL_KA.book 44 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination The system has a talk back function. If your spoken letter is not recognized, the system will talk back to you.
00 ACURA_RL_KA.book 45 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination If you did not select a city in the beginning, and the intersection appears in more than one city, you will see the Select a city screen. The system will give you a list of cities that the intersection appears in. Select the desired city from the list. If more than one intersection appears in the city, select the desired intersection from the Select an intersection screen.
00 ACURA_RL_KA.book 46 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination • When finishing a “Today’s Destinations” trip, the Today’s Destinations list entries are stored to this list, beginning with the date (e.g., item 1 shown on the previous screen). • Because both the Home and personal Address Book list can be protected by a PIN, they do not show up in the previous destination list.
00 ACURA_RL_KA.book 47 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination If desired, rotate the Interface Dial knob to change the map scale. When you have the crosshairs in the desired icon, map feature, or road, push in on the Interface Dial. The address of the location will appear at the top of the screen. If you select a single icon or road segment within the target mark, the following screen appears. Select Set as Dest. to calculate a route to the selected destination.
00 ACURA_RL_KA.book 48 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Showing the Map of State With the State selection, the display changes to the Select a state screen. After you select the desired state, the display changes to a map of the state, with the crosshairs located near the middle. The yellow box indicates the area you will see when you click on the current map with the Interface Dial.
00 ACURA_RL_KA.book 49 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Showing the Map of Continental USA With the Continental USA selection, the display changes to: If desired, rotate the Interface Dial knob to change the map scale. When you have the crosshairs on the desired icon, map feature, or road, push in on the Interface Dial. The address of the location you have selected will appear at the top of the screen.
00 ACURA_RL_KA.book 50 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination Editing Today’s Destinations List If you change your plans, you can modify the Today’s Destinations list order by distance, or by order of entry. Say or select Sort by Entry to sort the list by the entry order, and say or select Sort by Distance to sort the list by the distance order. To delete a destination, say or select DELETE and the display changes to Select a destination to delete screen. Select the destination to delete.
00 ACURA_RL_KA.book 51 ページ ２０１１年８月２６日 金曜日 午後５時８分 Entering a Destination NOTE: When finishing a “Today’s Destinations” trip, the Today’s Destinations list entries are stored to the Previous Destinations list, beginning with the date (e.g., item 1 shown below). This entry contains all the destinations that were included in the Today’s Destinations itinerary. This allows you to reselect the entire Today’s Destinations content at a later date.
00 ACURA_RL_KA.book 52 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Driving to Your Destination Calculate Route to Screen A route typically has three phases. • Initial route calculation (Calculate route to screen) (see page 52). Further selections from the Calculate route to screen include: ADD TO Address Book Allows you to add the destination to your Address Book. See By Address Book on page 33. • Change the route while en route (see page 74).
00 ACURA_RL_KA.book 53 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Changing the Routing Method The system lets you select the way you want to drive to your destination. Before selecting OK to calculate a route, you can change the routing method by moving the Interface Dial down. The route choices will appear in the address box. NOTE: When you are en route and want to change the routing method, press the MENU button, and select Change Method on the MENU screen (Route).
00 ACURA_RL_KA.book 54 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Viewing the Routes Selecting View Routes on the Calculate route to screen allows you to scroll through and view the various routes (Direct, Easy, Maximize Freeways, etc.) to your destination. If you select View Routes, the display allows you to see the distance and time to go for each route.
00 ACURA_RL_KA.book 55 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Viewing the Destination Map Selecting View Dest. Map displays a map of the destination vicinity. Press the CANCEL or NAVI BACK button to return. You can view the destination map anytime while en route by saying, “Display destination map.” Map Screen When you select OK on the Calculate route to screen, the map screen appears, showing your highlighted route in real time.
00 ACURA_RL_KA.book 56 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Voice Guidance Prompts As you get near the maneuver, you will hear a voice reminder and see a pop-up window showing you the maneuver. The number of reminders that you will hear before a maneuver is determined by Guidance Prompts in SETUP on page 93. With the factory default (NORMAL), typically you will hear two prompts: • The first is about 1/4 mile from the maneuver. • The final prompt is close to your actual turn.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 58 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Guidance Screen The guidance screen offers an alternative way to view your route information. Many of the icons and screen features are similar to those on the map screen. While driving to your destination, press the MAP/GUIDE button to switch between the map and guidance screens.
00 ACURA_RL_KA.book 59 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Distance and Time to Destination When you select a destination, the distance to the destination is the actual road distance of the calculated route, and not “as the crow flies.” When viewing a list of destinations (points of interest), such as restaurants, the distance is “as the crow flies” (see Sort by Distance to Travel on page 38).
00 ACURA_RL_KA.book 60 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Direction List If you select Directions from the Map menu, the display changes to: You can see the direction list and the distance to each maneuver. Press the MAP/GUIDE button or the CANCEL button to return to the previous screen. You can scroll through the Direction list screen by screen by moving the Interface Dial up or down, or one instruction at a time by rotating the Interface Dial knob.
00 ACURA_RL_KA.book 61 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination On the map screen, you can display freeway exit information using the Interface Dial. The exit info icon will only be displayed on the map screen if there is any freeway exit information available. Choose the 1/4, 1/2, or 1 mile scale, then move the crosshairs to the desired exit info icon and push in on the Interface Dial. Choose a place from the list and set it as a new destination or waypoint.
00 ACURA_RL_KA.book 62 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Map Scale Rotate the Interface Dial knob or say a voice command such as “Display 1/2 mile scale” (see page 160) to change the scale of the map. Zooming in increases the detail, while zooming out gives you a view of a wider area. After changing the scale, give the system a few moments to update the display. Functions available at various map scales Map Scale (English and Metric) For selecting units, see page 101. 1/20 mi.
00 ACURA_RL_KA.book 63 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Map Orientation The map can be orientated two ways: • North-up: North pointing up as you would normally view a paper map. • Heading-up: The map constantly rotates so the road you are driving on always points up (as you see the road through your front windshield). “North Up” “Heading Up” NOTE: The red arrow in both heading symbols always shows the direction north.
00 ACURA_RL_KA.book 64 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination The display automatically changes to the map screen when you reach your destination. Press the MENU button to return to the MENU screen (Enter destination by). NOTE: • For information on the available voice commands, see Voice Command Index on page 159.
00 ACURA_RL_KA.book 65 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Weather Icons Weather icons are displayed on all map scales.
00 ACURA_RL_KA.book 66 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination For some icons, you can choose either to show or hide them on the map, while others like Acura Dealer are always shown. The table below shows the features for each icon type. Some Points of Interest (POIs) like Police Stations are not shown as an icon, but you can still locate the nearest one with the voice command, “Find nearest Police Station.
00 ACURA_RL_KA.book 67 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Incident icon POI type Icon can be manually displayed Icon can be manually hidden Icon selection by voice Traffic speed Traffic incident One-way traffic icon Yes Yes Yes Yes Yes Yes Yes Yes Yes Icon can be selected as a destination on the map screen with the Interface Dial No No No POI can be found on the map screen using voice command “Find...” No Yes *1 No *1.
00 ACURA_RL_KA.book 68 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Showing Icons on the Map Selecting Show Icon on Map from the Map menu (see page 59) displays the following screen: CURRENT LOCATION (Interface Dial Left) This allows you to display and/or save your current location. See page 71 for more information.
00 ACURA_RL_KA.book 69 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination For instance, let’s assume that school is not displayed on the map, and you want to make sure that your settings are correct. You would do the following: • First, you would ensure that the “OTHER ICON” button on the Icon bar is blue (see Icon Bar on page 68). In the previous example, only ATM and POST OFFICE are selected and will show up on the map.
00 ACURA_RL_KA.book 70 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Going Off the Route Off-road Tracking If you leave the calculated route, “Recalculating...” is displayed at the top of the screen. The system will recalculate the route from your current location and direction to the desired destination, and then give you a new route instruction. This is done automatically if you have set Rerouting to AUTOMATIC on the SETUP screen (Other) (see page 101).
00 ACURA_RL_KA.book 71 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Viewing/Saving the Current Location Whenever you are on a map screen, you can always obtain your current location either by pushing in on the Interface Dial, selecting Show Icon on Map, and selecting Current Location, or by using the voice control system and saying “Display current location.” A screen pops up which shows the address of your current location, as well as the latitude, longitude, and elevation.
00 ACURA_RL_KA.book 72 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Pop-Ups and Disclaimers When you say “OK” in the Calculate Route to screen, or if you change your route, the system checks your route and provides you with pop-up messages for the following situations: • Your route passes near or bypasses unverified areas (see Unverified Area Routing on page 102). • You are about to enter an unverified area (see Unverified Area Routing on page 102).
00 ACURA_RL_KA.book 73 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Traffic Rerouting When driving en route to your destination, if the system detects a traffic incident to be avoided ahead on the route, the system automatically calculates the detour route and displays the pop-up box which shows you the information of the incident. Select an incident from the list, and push in on the Interface Dial twice.
00 ACURA_RL_KA.book 74 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Changing the Route • Saying “Go home” (page 77). While en route, you may wish to alter your route, add an interim “Waypoint” (pit stop), choose a different destination, or cancel your current destination. To change your present route, you can do any of the following: • Using the Interface Dial to select a different POI or address on the map (page 77).
00 ACURA_RL_KA.book 75 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Search Waypoint Waypoints allow you to add an interim “pit stop” while traveling to a destination. For instance, you may want to stop for gas or food, and then continue on to your destination. Although you can enter up to five waypoints at a time, typically you may never use more than one at a time. Waypoints are routed to in the order they were entered (number 1 first, etc.), with your final destination routed to last.
00 ACURA_RL_KA.book 76 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination From Places Around the Destination, the system displays matches in a spiral pattern outward from the destination. The search “corridor” distance value can be changed in Edit Waypoint Search Area in SETUP (see page 108). To add another waypoint, press the MENU button and repeat the procedure. If Search Waypoint is grayed out, the maximum of five waypoints has been entered.
00 ACURA_RL_KA.book 77 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination Changing Your Destination There are four methods by which you can change or add a waypoint to your route. These are: Find Nearest (Voice command) From the map screen, say one of the “Find Nearest...” voice commands to locate the nearest gas station, ATM, restaurant, or other point of interest. See the “Find Nearest” voice commands listing on page 161. Go Home (Voice command) From the map screen, say “Go home.
00 ACURA_RL_KA.book 78 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination When the pop-up menu is displayed, select Set as Dest. to set your location as a replacement destination, or Set as Waypoint to set as a waypoint. Entering a Destination from the Menu Screen (while en route) If you say “Menu,” or press the MENU button and select the “Enter destination by” tab, the system displays the MENU screen (Enter destination by).
00 ACURA_RL_KA.book 79 ページ ２０１１年８月２６日 金曜日 午後５時８分 Driving to Your Destination • For additional information on changing the routing method, see Changing the Routing Method on page 53. NOTE: The Continue trip to screen will not appear when the keyless remotes are unlinked (guest mode). In this case, select your destination from the Previous Destinations list. See page 45. AcuraLink Messages AcuraLink enhances your ownership experience by providing a direct communication link between you and Acura.
00 ACURA_RL_KA.book 80 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features The INFO function consists of two main screens. To display the INFO screen (Main Info), say “Information” or press the INFO button. To change it to the INFO screen (Other), select the “Other” tab. You can switch screens by selecting the tab. You can use the voice control system to select any item on the INFO screen.
00 ACURA_RL_KA.book 81 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Weather Information The Weather Information option allows you to view the weather forecast, warning list, and warning map. When you say or select Weather Information, the following screen appears: NOTE: • You can view the same screen by selecting Weather Info. from the Map menu (see page 59). • To receive weather information, your XM traffic/weather subscription must be paid. See page 117 for details.
00 ACURA_RL_KA.book 82 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Viewing Warning List You can view a list of all weather warnings in the United States. Say or select Warning List Sorted by Distance, and the display changes to: Viewing Warning Map You can view the warning map, which contains different colors according to the type of warning. Say or select Warning Map, and the display changes to: Say “Read List” or move the Interface Dial down, and the information will be read to you.
00 ACURA_RL_KA.book 83 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Weather Information on Map Weather Icons The weather icons can be displayed on the map screen when turned on (see page 68). The weather icons appear next to the city names on all map scales. When you select the weather icon next to a city name and push in the Interface Dial, the Forecast screen will be displayed. To return to the map screen, press the CANCEL button or move the Interface Dial to the left.
00 ACURA_RL_KA.book 84 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features You can also view the weather information for your destination when you select the destination directly from the map screen (use the Interface Dial to position the target mark on your desired destination, and then push in on the Interface Dial).
00 ACURA_RL_KA.book 85 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Elapsed Time Shows the elapsed time that the ignition has been on. Average Speed Shows you the average speed in miles per hour (mph) since the trip meter was last reset. Range Shows the estimated distance you can travel on the fuel remaining in the tank. This distance is estimated from the average fuel economy over the last several miles, so it will vary with changes in speed, traffic, etc.
00 ACURA_RL_KA.book 86 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features You can scroll through the calendar day by day by rotating the Interface Dial knob, or select the day by voice. When you move the Interface Dial up or down, you can also scroll through the calendar week by week. To change the month, say “Next month” or “Previous month,” or move the Interface Dial right or left.
00 ACURA_RL_KA.book 87 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Delete From the Calendar screen, select the date of the schedule you wish to remove. To remove the schedule, say or select DELETE. Calculator When you say or select Calculator, the display changes to: Done Once you have finished entering the schedule, say or select DONE. The Calendar screen is redisplayed and the entered schedule is shown. NOTE: • Only one entry can be stored for each calendar day.
00 ACURA_RL_KA.book 88 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features 4. Select the base unit (e.g., pounds) that you wish to convert to some other unit. All other units will change automatically depending on the base unit value. In the example below, 100 lbs converts to 1600 ounces, 0.05 ton (U.S.), etc. NOTE: • If you do not enter a value to be converted, only “Temperature” units are selectable. • Conversions using negative values may produce meaningless or physically impossible values.
00 ACURA_RL_KA.book 89 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Voice Command Help When you say or select Voice Command Help, you will see the following screen: NOTE: You can select an item by saying either the line number or the item name. There is a tutorial available for the voice command help. Say or select Getting started, and the display changes to: Select the line number of the desired tutorial you want to view, and the tutorial will automatically be read.
00 ACURA_RL_KA.book 90 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Map Legend Key to Zagat Ratings You can use the Map legend screens to learn the meaning of map features, icons, colors, etc. used in this system. When you say or select Map Legend, the display changes to: When you display data for a Zagatsurveyed restaurant on the Select a place screen, you will see the description of ratings as follows: Say or select the desired item or item number to view each section of the map legend.
00 ACURA_RL_KA.book 91 ページ ２０１１年８月２６日 金曜日 午後５時８分 Information Features Use the Interface Dial to scroll through the Key to Zagat Ratings screens.
00 ACURA_RL_KA.book 92 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup SETUP Mode The SETUP function consists of two main screens that allow you to change and update information in the system. To display the SETUP screen (Main Setup), use the voice control system and say “Setup” or press the SET UP button. To change it to the SETUP screen (Other), select the “Other” tab. You can switch screens by selecting the tab. You can use the voice control system to select any item on the SETUP screen.
00 ACURA_RL_KA.book 93 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Contrast The screen contrast has 11 settings. To adjust the contrast, use the voice control system and say “Contrast up” or “Contrast down.” You can also select Contrast and change the setting by rotating the Interface Dial knob. Black Level The screen black level has 11 settings. To change the black level, use the voice control system and say “Black level up” or “Black level down.
00 ACURA_RL_KA.book 94 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Setting Distance before maneuver About About Just 1/4 1/2 before mile mile maneuver MIN Yes NORMAL Yes (factory default) Yes Yes MAX Yes* Yes Yes* SETUP Screen (Other) Personal Information Select the “Other” tab to view additional SETUP functions and the following screen appears: From the SETUP screen (Other), say or select Personal Information and the following screen appears: * Uses street name in guidance phrase.
00 ACURA_RL_KA.book 95 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Address Book The Address Book allows up to a total of 200 address entries. After 200 entries, the ADD TO Address Book button is grayed out. The 200 addresses are shared between Driver 1 and Driver 2. For example, if Driver 1 has 150 addresses, Driver 2 can only have 50. You can add, modify, and delete information in the personal Address Book list. You may choose to use a Personal Identification Number (PIN) to protect your privacy.
00 ACURA_RL_KA.book 96 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Entering an Address After you select Address Book, your Address Book list appears: Edit Name You may use the “Name” field to give the entry a name or title that you will recognize later, such as “Doctor Smith” or “Broadway Theatre.” If you do not give the address a name, the system will assign one (Address 001, etc.). Select New Address by pushing the Interface Dial when beginning to build your Address Book list.
00 ACURA_RL_KA.book 97 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Places - Allows you to select one of the Point of Interest (POI) locations already stored in the system as one of your personal addresses. This operation is the same as selecting Places from the MENU screen (Enter destination by). See page 34. Edit Phone Number You can enter the telephone number of the address. If the address was chosen with Places, and it has a telephone number, that number is entered automatically.
00 ACURA_RL_KA.book 98 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup If you delete a category that was used to categorize addresses, the category for those addresses becomes “UNFILED.” NOTE: You may have up to 100 categories. These are shared between Driver 1 and Driver 2. Edit/Delete an Address This feature allows you to select an address to edit or delete. Once an address is selected, choose the appropriate function and push in on the Interface Dial to select.
00 ACURA_RL_KA.book 99 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup PIN Number You can set a four-digit PIN (Personal Identification Number) for accessing the following features, if desired: • Setup: - Address Book - Home Address - PIN Number • MENU screen (Enter destination by) - Address Book - Go Home • Map screen: - Go Home (by voice control) • INFO screen: - Calendar 1. Select PIN Number.
00 ACURA_RL_KA.book 100 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Previous Destinations Allows you to delete some or all of your previous destinations. 1. Select this option, and the display changes to: 2. Scroll through the list and find the address you want to delete. 3. Select the address to delete by saying the line number, or by using the Interface Dial.
00 ACURA_RL_KA.book 101 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Units (mile or km) Allows you to select the units for the entire system (mile or km). Voice Recognition Feedback Allows you to turn voice control system prompts ON or OFF. When OFF, you will not hear the voice control system confirmations or prompts. Auto Volume for Speed This navigation system automatically increases the navigation volume according to the vehicle speed. This setting allows you to adjust the rate of the volume increase.
00 ACURA_RL_KA.book 102 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Unverified Area Routing Allows you to receive turn-by-turn map and voice guidance in unverified areas when en route to a destination (see Map Overview on page 6). The chart below illustrates the routing differences with this setting ON or OFF.
00 ACURA_RL_KA.book 103 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Unverified Area Routing When driving to your destination, you have the choice of using or not using “unverified” roads. You make this choice in the SETUP screen. The next few pages contain an example of a route to a destination in an unverified area explaining the routing differences found in unverified areas. Because both routes bypass or use unverified streets, an initial Disclaimer screen is provided.
00 ACURA_RL_KA.book 104 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup With Unverified Area Routing OFF, the driver chose to take a shortcut and avoid the long route. The moment you enter an unverified street, a caution box appears on the screen and is read by the voice. This lets you know that you are about to enter an unverified area and that you will be following a dotted “vector line” that points to your destination.
00 ACURA_RL_KA.book 105 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup With Unverified Area Routing OFF, you are presented with a blue “vector line” that always points to the destination. You must manually choose streets from the map that will lead to your destination. No guidance is provided, and there are no directions to the destination. With Unverified Area Routing ON, a blue/pink route line is shown for unverified segments. Voice guidance commands in unverified areas always end with “if possible.
00 ACURA_RL_KA.book 106 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Traffic Rerouting When driving en route to your destination, if the system detects a traffic incident ahead on the route, the system automatically calculates the detour route and displays the pop-up box which shows you the information of the incident. When Traffic Rerouting is set to ON, the system will automatically calculate the detour route and display the pop-up box.
00 ACURA_RL_KA.book 107 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Say or select Edit Area to create the area to be avoided. The following screen appears: Either select Address or Map Input on the Enter avoid area by screen. Each choice provides a slightly different way to locate the approximate map display for drawing the area you wish to avoid. After selecting the choice, a map screen will be displayed.
00 ACURA_RL_KA.book 108 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Say or select DONE to return to the Edit avoid area screen. If your selected area contains a freeway, the system will prompt you with a popup box saying “Do you want to avoid freeways?” Answering “No” allows you to enter a route through an avoided area on a freeway and skip the “Avoid area caution box” (see Pop-Ups and Disclaimers on page 72).
00 ACURA_RL_KA.book 109 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup For “Places Along the Route,” the system looks in front of you within a corridor width specified by your values for “On Freeways” or “On Surface Street.” The system checks the upcoming area, based on your input. The diagram below shows how the system handles the search for “Places Along the Route” or “Places Around the Destination” (see Search Waypoint on page 75).
00 ACURA_RL_KA.book 110 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Clock Adjustment From the SETUP screen (Other), say or select Clock Adjustment and the following screen appears: This screen allows you to set or adjust the following: • Auto Daylight (Default = ON) • Auto Time Zone (Default = ON) • DST (Daylight Savings Time) Selection (change DST schedule) Auto Daylight Sets automatic daylight savings time ON or OFF.
00 ACURA_RL_KA.book 111 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Auto Time Zone Sets automatic time zone selection by GPS to ON or OFF. If you are driving across the country and passing through time zones, then this feature will automatically set the time to the time zone you are traveling through. However, if you live and work in two different time zones, you may want to turn this feature off. NOTE: When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times.
00 ACURA_RL_KA.book 112 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Vehicle From the SETUP screen (Other), say or select Vehicle and the following screen appears: Off-road Tracking With this ON, the system will provide white off-road tracking dots (“breadcrumbs”) on the map screen whenever you drive into an area where the map does not show any roads. See Map Screen Legend on page 20.
00 ACURA_RL_KA.book 113 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup 2. Select Correct Vehicle Position, and the system will display a map adjustment screen. 4. Rotate the Interface Dial knob so the vehicle position arrowhead is pointing in the correct direction, and push in on the Interface Dial. The display will return to the previous screen.
00 ACURA_RL_KA.book 114 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Map Color Allows you to choose the map color from one of four colors for the Day and Night modes. Menu Color Allows you to choose the menu color from one of five colors for the Day and Night modes. Switching Display Mode Manually Pressing the Display Mode button allows you to toggle through the screen display modes: Day, Night, or Off.
00 ACURA_RL_KA.book 115 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup Switching Display Mode Automatically I llumination control Priority Operation But remember Display Mode button (see page 11) 1 Allows selection of Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below. Once you press this button, you assume full manual control of the display mode until the ignition key is cycled again.
00 ACURA_RL_KA.book 116 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup • To allow the sunlight sensor to function properly, avoid blocking the sensor with loose articles (see your Owner’s Manual for location of sensor). • Remember that once the Display Mode button vehicle is restarted. is selected, the other display mode controls are overridden until the NOTE: Loose articles in the center dash can block or interfere with the operation of the sunlight sensor.
00 ACURA_RL_KA.book 117 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup AcuraLink/Messages Traffic & Weather Status For complete details on setting up your AcuraLink messaging, refer to the AcuraLink section in your Owner’s Manual. Or, you can go to the Owner Link section on the Ownership Experience page at www.acura.com. You can confirm the reception status of XM signal, traffic information data, or weather information data.
00 ACURA_RL_KA.book 118 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Setup System Information Rearview Camera From the SETUP screen (Other), say or select System Information and the following screen appears: Your vehicle is equipped with a rearview camera as shown in the illustration. Rearview Camera Displays the information on the navigation system software. This information is for dealer use only. For ordering updates, use the version number stamped on the label (as Ver. X.XX) of the navigation DVD.
00 ACURA_RL_KA.book 119 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Initialization System Initialization Entering the Security Code If for any reason you lose power to the navigation system (e.g., the battery was disconnected), the navigation system will require initialization. Once completed, your system will be ready to use. If the battery goes dead or is disconnected for any reason, you will have to enter a security code for both the audio system and the navigation system before you can use it again.
00 ACURA_RL_KA.book 120 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Initialization GPS Initialization Depending on the length of time the battery was disconnected, your system may require GPS initialization. If it does, the following screen appears: The navigation system lost power and is acquiring its location from the GPS satellites. This usually takes less than 10 minutes. * Start the engine. * Park the vehicle in an open area away from trees, power lines, and tall buildings.
00 ACURA_RL_KA.book 121 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Limitations Although your navigation system is one of the most highly sophisticated pieces of equipment you will find in a modern automobile, you may find during its use that it has certain limitations. The system uses GPS signals to aid in determining its current location. The GPS is operated by the U.S. Department of Defense.
00 ACURA_RL_KA.book 122 ページ ２０１１年８月２６日 金曜日 午後５時８分 System Limitations The destination icon shows the approximate location of the destination. This occurs because a city block can have as many as 100 possible addresses (for example, the 1400 block is followed by the 1500 block).
00 ACURA_RL_KA.book 123 ページ ２０１１年８月２６日 金曜日 午後５時８分 Database Limitations You will find that some points of interest (POI) may be missing when you search the database. This can be caused if at the time the database was gathered, the name was misspelled, the place was improperly categorized, or the POI change is not yet in the database. This means you may not find places listed that you know exist. This is also true for police agencies and hospitals.
00 ACURA_RL_KA.book 124 ページ ２０１１年８月２６日 金曜日 午後５時８分 Database Limitations • Traffic facilities safety Copyrights • Special events • infoUSA-Data: Certain business data provided by infoUSA, Inc., Omaha, Nebraska, Copyright © 2010, All Rights Reserved. • Pavement characteristics or conditions We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above. • EXIT-Data: © ZENRIN CO., LTD. 2010. All Rights Reserved.
11 ACURA_RL_KA.fm 125 ページ ２０１１年８月２８日 日曜日 午後１２時１４分 Client Assistance Reporting Errors Occasionally, you may encounter database errors. • If the error pertains to freeways and main “verified” roads shown in black on the map, then report it either online at http://update.navteq.com/ Acura Client Relations. • If the error involves a light brown “unverified” road, then do not report it. These areas have not been verified and are provided for reference only (see Map Overview on page 6).
00 ACURA_RL_KA.book 126 ページ ２０１１年８月２６日 金曜日 午後５時８分 Client Assistance Visiting Your Dealer We strive to make this manual as complete as possible and to answer all questions regarding operation of the system. Occasionally, you may run into a specific issue that you cannot find in the book. You may save yourself a trip to the dealer by first consulting the following resources: • The Troubleshooting section (see page 155). • The Frequently Asked Questions (FAQs) section (see page 147).
00 ACURA_RL_KA.book 127 ページ ２０１１年８月２６日 金曜日 午後５時８分 Client Assistance Obtaining a Navigation Update DVD Acura is continually expanding the scope of the navigation system. Upgraded software may be made available to navigation system owners periodically, usually in the fall of each year. To purchase an updated DVD or a replacement DVD, call the Acura Navigation Disc Fulfillment Center at (888) 549-3798. You can also order online by going to the Acura Store link at www.acuranavi.com.
00 ACURA_RL_KA.book 128 ページ ２０１１年８月２６日 金曜日 午後５時８分 Client Assistance NOTE: • The system will not play movies or other video/audio discs. • Never “sneak preview” a newer white labeled DVD in the system unless you plan to keep it. The system cannot automatically revert to a prior version DVD. If you must revert to a previous version DVD, see your dealer for assistance. • Please keep the door to the navigation control unit closed at all times.
00 ACURA_RL_KA.book 129 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Map Coverage The system provides map coverage for the lower 48 U.S. states, Hawaii, and southern Canada. The U.S. map coverage consists of accurately mapped (verified) metropolitan areas (in the following list) and a less accurate (unverified) rural database. Canada coverage consists of major metropolitan areas and major roads connecting the metropolitan areas within about 100 miles north of the U.S. border.
00 ACURA_RL_KA.book 130 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Delaware Entire state – including Dover, Wilmington Metro area, New Castle County Florida Cape Canaveral/Cocoa Beach/ Titusville Dixie County Florida Keys Fort Myers Metro area – including Naples Fort Pierce Gainesville Jacksonville Metro – including St. Johns County Miami/Fort Lauderdale/West Palm Beach Metro Orlando/Daytona Beach/Melbourne area – including Osceola County Panama City Pensacola Tallahassee Tampa Bay/St.
00 ACURA_RL_KA.book 131 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Iowa Ames Cedar Rapids Davenport Des Moines Dubuque Iowa City Sioux City Waterloo-Cedar Falls Kansas Kansas City/Leavenworth Metro Topeka Wichita Kentucky Bowling Green Lexington Louisville Owensboro Louisiana Baton Rouge Lafayette New Orleans Metro Shreveport Maine Bangor Bar Harbor/Acadia National Park Portland/Lewiston/Auburn Southern Maine Maryland State of (partial) - Baltimore/ Washington D.C.
00 ACURA_RL_KA.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 134 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Virginia Washington D.C.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 136 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Torbay Wabana Rimouski-Neigette Rimouski Rivière-du-Loup Rivière-du-Loup NOVA SCOTIA Halifax (partial) ONTARIO Brant Brant Brantford Chatham-Kent Chatham-Kent Dufferin Amaranth East Garafraxa East Luther Grand Valley Melancthon Mono Mulmur Orangeville Shelburne Durham Ajax Brock Clarington Oshawa Pickering Scugog Uxbridge Whitby Elgin Aylmer Bayham Central Elgin Dutton/Dunwich Malahide Southwold St.
00 ACURA_RL_KA.
00 ACURA_RL_KA.
00 ACURA_RL_KA.
00 ACURA_RL_KA.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 142 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas CANADA CONNECTOR ROADS The Cross-Canada Connector Road allows for travel between the provinces of British Columbia and Quebec in DCA 11. Major metropolitan city POIs are also included.
00 ACURA_RL_KA.book 143 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Cities with available in-car traffic information The following cities currently have available continuously updated traffic information. In the U.S. Albany-Schenectady-Troy, NY Albuquerque, NM Allentown-Bethlehem, PA Atlanta, GA Austin, TX Baltimore, MD Birmingham, AL Boston, MA Buffalo-Niagara Falls, NY Charlotte-Gastonia-Rock Hill, NC Chicago, IL Cincinnati, OH Cleveland, OH Colorado Springs, CO Columbus, OH Dallas-Ft.
00 ACURA_RL_KA.book 144 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Operation in Alaska and Hawaii Certain functions that rely on a satellite signal will not work correctly in Alaska and Hawaii. These functions include but are not limited to AcuraLink, NavTraffic, Weather, automatic clock updates, and time zone adjustments. Alaska If the vehicle was purchased in the lower 48 states and driven to Alaska, the system cannot display maps. The message “Vehicle is out of the database...” will be displayed.
00 ACURA_RL_KA.book 145 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Address and POI Entry Screens When in Hawaii, the following differences occur for map, address, and POI selection: • It is not possible to enter U.S. mainland addresses or scroll the map east to the U.S. mainland. • Selection of the “State” is confined to the state of Hawaii only. • Entry of a destination address or POI on an island other than your current island may result in a screen caution message.
00 ACURA_RL_KA.book 146 ページ ２０１１年８月２６日 金曜日 午後５時８分 Coverage Areas Roadside Assistance This selection may not be shown. The number can be found in the navigation Owner’s manual (see the Information screen). Additionally, this number is listed in the “Auto Service” category in the Places menu. Map Legend The map legend “Traffic” and “Weather” descriptions may be available, but do not apply.
00 ACURA_RL_KA.book 147 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Map and Features, Voice Operation, Entering Addresses Problem Why does the Disclaimer screen need to be displayed every time I start the car? I am the only driver. The SETUP or INFO screen has “grayed out” items that I cannot select. Why? I tried entering an address, but the city or street could not be found. Is there any other way to route to the location? When I enter an address, some letters become grayed out.
00 ACURA_RL_KA.book 148 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Problem When I drive at night, the screen is bright and will not switch to the night display mode. Why? The daytime map screen is dark like the night display mode, and it is hard to see. Why? Once I press the Display Mode button , the screen no longer automatically switches between day and night display modes.
00 ACURA_RL_KA.book 149 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Traffic Problem My AcuraLink Real-Time Traffic is missing and is not displaying properly. What is wrong? Solution Verify the following: • Check the traffic icon on the icon bar, and the icon options for traffic. Page 68 walks you through the verification steps. • Ensure that you have the correct remote (the settings for Driver 1 and Driver 2 are set independently by each driver).
00 ACURA_RL_KA.book 150 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Guidance, Routing Problem Solution The navigation does not route me the same way I would go, or the way some other mapping program displays. Why is this? The navigation system attempts to generate the optimum route. See Changing the Routing Method on page 53. The navigation wants to route me around potential traffic problems. How do I stop these pop-up messages? This feature can be turned off.
00 ACURA_RL_KA.book 151 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Problem Solution The vehicle position icon on the map “lags” a short distance behind, especially when I arrive at an intersection. Is there anything wrong? No. When at an intersection, the system is unaware of the width of the intersecting road. Large differences in vehicle position can indicate a temporary loss of the GPS signal. See GPS Reception Issues on page 121.
00 ACURA_RL_KA.book 152 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Ordering a Navigation DVD, Coverage, Map Errors, Limitations Problem Solution I want to buy a new DVD. How do I purchase one? You cannot obtain a new DVD from the dealer. See Obtaining a Navigation Update DVD on page 127. I want to order a DVD. How can I determine the DVD version in my navigation system? The version is on the label of your DVD. It starts with “Ver:.” See Changing the DVD on page 127.
00 ACURA_RL_KA.book 153 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Display, Accessories Problem The display appears dim when starting the car in really cold weather. Is there a problem? Solution No. This is normal, and it will become brighter after a few minutes. Rear Camera Problem Solution When I shift gears, the rear camera image is delayed.
00 ACURA_RL_KA.book 154 ページ ２０１１年８月２６日 金曜日 午後５時８分 Frequently Asked Questions Problem Solution Daylight savings time occurred, but the navigation system did not change time even though SETUP shows Auto Daylight is ON. Go to the Clock adjustment screen in SETUP and select DST Selection. Ensure that the correct DST schedule is selected. For more information, see Clock Adjustment on page 110.
00 ACURA_RL_KA.book 155 ページ ２０１１年８月２６日 金曜日 午後５時８分 Troubleshooting Screen Error Message Solution Navigation system is unable to acquire a proper GPS signal. Make sure there is nothing on the rear shelf blocking the GPS antenna (aftermarket metallic window tinting or aftermarket devices placed on the rear shelf like radar detectors, cell phones, or loose items). If the rear shelf is clear of objects, move the vehicle to an open space away from tall buildings, trees, etc.
00 ACURA_RL_KA.book 156 ページ ２０１１年８月２６日 金曜日 午後５時８分 Glossary Glossary The following is a glossary of terms pertaining to the voice recognition navigation system. Average Fuel - The average fuel economy value as displayed by the Trip computer screen. Avoid Area - Areas you wish to avoid can be entered into the system, and will be avoided while routing. Breadcrumbs - Off-road tracking dots that can be followed on the map to retrace your route back to a mapped (digitized) road.
00 ACURA_RL_KA.book 157 ページ ２０１１年８月２６日 金曜日 午後５時８分 Glossary Initialization - This refers to the period needed to reacquire the GPS satellite orbital information whenever the navigation system power has been disconnected. This can take 10 to 45 minutes with the vehicle out in an open area. Instant Fuel - The current instantaneous fuel economy value as displayed by the Trip computer screen. LCD - Liquid Crystal Display. The navigation screen.
00 ACURA_RL_KA.book 158 ページ ２０１１年８月２６日 金曜日 午後５時８分 Glossary Vehicle Speed Sensor - Provides speed signal to the navigation system for moving the VP icon on the map. Verified Streets - These streets consist of the detailed metropolitan coverage areas and all other inter-town connection roads. These roads are shown in black on the map. Voice Control - See VR. VP - Vehicle Position. When in map mode, this circular icon shows the vehicle position on the map.
00 ACURA_RL_KA.book 159 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Global Commands The system accepts these commands on any screen.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 161 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Hide: (hide the selected icon from the screen) ATM gas station restaurant post office grocery store lodging (hotel, motel) parking garage parking lot school hospital one way freeway exit information traffic traffic speeds traffic icons weather weather warning icon weather icons Max zoom in Max zoom out Go home Messages Find Place Commands The system accepts these commands on a map/guidance screen.
00 ACURA_RL_KA.
00 ACURA_RL_KA.book 163 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Fan speed up Fan speed down Fan speed # (#: 1-7) (for best voice control, lower the fan speed) * Repeating these commands switches (toggles) the function between On and Off, so the action that occurs may not match the command you speak. Temperature Voice Commands The system accepts these commands on most screens.
00 ACURA_RL_KA.book 164 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Radio select XM1 Radio select XM2 XM channel # (#: 1-255) XM channel up XM channel down XM category up XM category down XM preset # (#: 1-6) XM1 preset # (#: 1-6) XM2 preset # (#: 1-6) XM scan* XM category scan* XM channel scan* XM category mode XM channel mode * Repeating these commands switches (toggles) the function between On and Off, so the action that occurs may not match the command you speak.
00 ACURA_RL_KA.book 165 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index DVD Voice Commands The system accepts these commands on most screens.
00 ACURA_RL_KA.book 166 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index INFO Screen Voice Commands SETUP Screen (Main Setup) Commands These are additional commands not found on the Voice Command Help screen available when viewing the INFO screen (Other). Follow the voice prompts.
00 ACURA_RL_KA.book 167 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index On-Screen Commands The system accepts these commands on any screen. There are over 100 onscreen commands. Just say what is written on the screen (this excludes listed items). Next (or “Down”) Previous (or “Up”) Return OK (except at Disclaimer screen) Delete Done etc. On-Screen Spelling Assist When speaking the letters or using “spell mode,” you can substitute the name that represents each letter or symbol. This improves recognition.
00 ACURA_RL_KA.book 168 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Letters Assist Definitions: Say A B C D E F G Or say “...” Alpha/Apple Bravo/Boy Charlie Delta/Dog Echo/Edward Foxtrot/Frank Golf/George Say H I J K L M N Or say “...” Hotel/Henry India/Igloo Juliet/John Kilo/King Lima/Larry Mike/Mary November/Nancy Say O P Q R S T U Or say “...” Oscar Papa/Paul Quebec/Queen Romeo/Robert Sierra/Sam Tango/Tom Uniform/Uncle Say V W X Y Z Or say “...
00 ACURA_RL_KA.book 169 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Symbol Assist Definitions: Symbols À Â Ä Ç È É Ê Ë ì Say “...” or “Symbol ...” A grave A circumflex A umlaut C cedilla E grave E acute E circumflex E umlaut I grave Symbols î ï Ô Ù Û Ü @ ^ * Say “...” or “Symbol ...” I circumflex I umlaut O circumflex U grave U circumflex U umlaut At sign Caret Asterisk Symbols _ ` , . ? : ; + Say “...” or “Symbol ...
00 ACURA_RL_KA.book 170 ページ ２０１１年８月２６日 金曜日 午後５時８分 Voice Command Index Numbers and Additional Symbol Assist Definitions: Numbers Say “...” or “Number ...” Symbols Say “...” or “Symbol ...” 1 One Hyphen 2 ! Two Exclamation point 3 4 5 6 7 8 9 0 Three Four Five Six Seven Eight Nine Zero ” # $ % & ’ ( ) Double quote Pound Dollar Percent Ampersand Apostrophe Open parenthesis Close parenthesis Symbols Say “...” or “Symbol ...
00 ACURA_RL_KAIX.fm 171 ページ ２０１１年８月３０日 火曜日 午後３時６分 Index A Accessing the Address Book List .....95 Acura Client Relations ..................125 AcuraLink/Messages .........79, 80, 117 ADD TO Today’s Destinations ...........................50, 52 Adding Destinations to the List ........50 Address ..............................28, 29, 96 Address Book .....................28, 33, 95 Advanced .......................................36 Alaska (Operation) ........................144 Auto Daylight .............
00 ACURA_RL_KAIX.fm 172 ページ ２０１１年８月３０日 火曜日 午後３時６分 Index E Easy Route .....................................53 Edit Avoid Area ............................106 Edit Waypoint Search Area ............108 Edit/Delete Address ........................98 Editing Today’s Destinations List ....50 Emergency .....................................36 Entering a Destination .....................28 Entering Address.............................96 Entering Schedule ...........................86 Entering Security Code ....
00 ACURA_RL_KAIX.fm 173 ページ ２０１１年８月３０日 火曜日 午後３時６分 Index N Name .......................................34, 39 NAVI BACK button........................13 NAVI TALK button ........................13 Navigation Display Commands ......160 Navigation General Commands ......159 New Messages ................................59 O Off-road Tracking ...................70, 112 One-Way Traffic Icon ...20, 57, 62, 64 On-Screen Commands ...................167 On-Screen Spelling Assist .............167 P PC Card.......
00 ACURA_RL_KAIX.fm 174 ページ ２０１１年８月３０日 火曜日 午後３時６分 Index U Unit Conversion ..............................87 Units (mile or km) .........................101 Unverified Area Routing ...............102 Unverified Streets .............................7 Update DVD .................................127 Upper Display.................................12 Using the Voice Control System ......14 Waypoints ................................... 108 Weather Forecast ........................... 81 Weather Icons .........
00 ACURA_RL_KA.book 175 ページ ２０１１年８月２６日 License notice You have acquired a device (“DEVICE”) that includes software licensed by ALPINE ELECTRONICS, INC., from an affiliate of Microsoft Corporation (collectively “MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
00 ACURA_RL_KA.book 176 ページ ２０１１年８月２６日 the SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental Components”). • If ALPINE ELECTRONICS,INC., provides or makes available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.
