Owner's Manual Owner manual

With the headlight switch off, the
high beam headlights and the high
beam indicator come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
off, even if you set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
The instrument panel will illuminate
with reduced brightness when you
unlock and open the driver’s door.
The brightness will increase slightly
when you insert the key in the
ignitionswitch,thengotonormal
brightness when you turn the
ignition switch to ON (II).
Turntheknobontherightsideof
the instrument panel to adjust the
instrument panel brightness. There
are six brightness levels. When you
turn the knob, the odometer display
changes to circles that show you the
current level. The display returns to
the odometer values five seconds
after you stop adjusting the knob.
If you do not insert the key in the
ignition switch after opening and
closing the driver’s door, the
illumination turns off in about 30
seconds.
If you insert the key but do not turn
the ignition switch to ON (II), the
illumination turns off in about 10
seconds.
Controls Near the Steering Wheel
Instruments and Controls
Daytime Running Lights
(Canadian Models)
Instrument Panel Brightness
72
Main Menu
Table of Contents