Owner's Manual Owner manual

CONTINUED
Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
You could scratch the wheel if you
putitfacedown.
Locate the jacking point nearest
thetireyouneedtochange.Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
7. 8. 9.
Changing a Flat Tire
Taking Care of the Unexpected
307
JACKING POINT
WHEEL WRENCH
EXTENSION
Main Menu
Table of Contents