User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.2 echochar- Turns the character echo on or off
Command
echochar value
Function
Check (no value) or turn echo on/off.
Description
Enables or disables the echo of each byte sent by serial communication in Autonomous
Mode.
Pattern
on
Values
on
off
Notes
When set to off, typing in a "Putty" terminal will not appear if the character echo is not
configured in the terminal software.
Example
To check the value:
echochar<CR>
off<CR>
To disable RF and tag reading:
echochar off<CR>
ok - parameter has been changed.<CR>
Errors
When the value reported is not among the specified:
error - value out of range<CR>
When more than one value is passed to the command:
error - too many args.<CR>