User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.18 keystrokespeed - Keyboard emulation typing speed
Command
keystrokespeed value
Function
Check (no value) or change the typing speed of the keyboard emulation.
Description
The typing speed in keyboard emulation, when readmode is as hid or hidserial, can be
changed to three different values.
Pattern
Fast
Values
Fast
Quick typing, period between typing T=4ms.
Medium
Average typing, period between typing T=32ms.
slow
Slow typing, period between typing T=64ms.
Example
To check the typing speed:
keystrokespeed<CR>
fast<CR>
To change the speed to slow:
slow<CR keystrokespeed>
ok - parameter has been changed.<CR>
Errors
When the value reported is not among the specified:
error - value out of range<CR>
When more than one value is passed to the command:
error - too many args.<CR>
This value should be changed only if the Host will receive the result string via
NOTE: Keyboard emulation presents problems due to the typing speed exercised by
the reader.