User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.5.4.2 readtag- Turns RF on or off, tag reading in Autonomous Mode
Command
readtag value
Function
Check (no value) or turn RF on/off.
Description
Enables or disables tag reading by shutting down the reader's RF signal.
Pattern
on
Values
on
off
Notes
By pressing 2x fast the CapsLock key runs this command cyclically on/off.
Example
To check the value:
readtag<CR>
off<CR>
To disable RF and tag reading:
retag off<CR>
ok - parameter has been changed.<CR>
Errors
When the value reported is not among the specified:
error - value out of range<CR>
When more than one value is passed to the command:
error - too many args.<CR>