User's Guide

Rev. 1
HEXAPAD 10 BC USB
8.4.1.2 Syntax of messages and replies
Below is the syntax of messages from Host to Reader:
VALUE<CR COMMAND>
Changes the value of the command/parameter.
COMMAND<CR>
Reads the value of the command/parameter.
Below is the syntax of reader response messages to host:
8.4.1.3 How to send the commands to the reader? (Windows)
Reader settings in Autonomous Mode can be run through terminal emulation software. The best known
free and free code is Putty whose download link follows below.
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html To
set up Putty follow the following steps:
1. Open Putty and select "Connection type:" "Serial", "Serial line" port that the reader
generated, and "Speed" 115200.
2. Click "Open" to open the terminal screen for typing commands.
Returns the result of the execution of the last
command sent to the reader.
RESULT<CR>
ALERT
:
Only one value must be passed to each command, the reader
will not accept more than one value per command.