User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

81 de 92

12 Mensagens de Log do leitor - Syslog

Collecting syslog messages from the reader is very important to make a diagnosis of how the reader is

behaving in its operating environment. It is recommended to collect messages even if the reader is

being used with Wiegand or Abatrack interface.

Reader Syslog messages have complete information about their behavior, from their temperature to

parameter changes by the user, so to obtain a complete diagnosis for monitoring or analysis of reader

errors is necessary to collect and store Syslog messages.

To collect the Syslog messages that the reader generates, you need software (Syslog Server) that will

run on a Host on the same Ethernet network that the reader is on, this Software is responsible for

receiving and storing the messages for further analysis.

The IP or hostname of the computer that will receive the messages must be properly configured on the

reader, please refer to the Network Configuring.

Below is a recommendation for Syslog Server software:

Visual Syslog Server: https://visual-syslog-server.software.informer.com/1.6/

To perform access to the Visual Syslog Server, you must place the COMPUTER IP with the Software

installed in this field:

After that, access the Visual Syslog Server and track the behavior of the reader.