User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
80 de 92
Message
Category
Description
Messages
are divided into
categories
BOOT
Messages about the firmware boot of the reader.
CLOCK
Messages related to the internal clock process.
DNS
Messages related to the DNS name resolution process of the SNTP
and Syslog servers.
HMTL
Messages from the reader's internal Web server.
INIT
Readear startup messages, before firmware boot.
INPUT
Messages related to the digital input of the reader.
MRF
Messages from the reader's main process.
NET
Messages related to the reader's Ethernet interface.
PARAM
Messages related to settings parameters.
RST
Messages on pci interface reset button.
SNTP
Messages related to the timing process of the reader's internal clock
with SNTP server.
TRIGGER
Messages related to Trigger read mode.
SYS
Messages generated by the Syslog process.
Features of reader Syslog:
• Reader log/status messages are not stored in non-volatile memory by the messages are
generated and sent in real time;
• The frequency of sending Syslog messages by the reader is 2Hz, i.e. every 500ms the
reader's internal process consumes the message buffer and sends it to the Syslog
Server;
• If the 'Send internal temperature of the reader's RF module to Syslog' parameter is
enabled, a message is generated with each temperature degree change;
• Messages in the PARAM category show at the end of the message, between [ ], the
current value modified of the parameter in question;