User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

76 de 92

11 Data communication

11.1 TCP/IP connections to receive tag readings

The Edge-30R(-N)+ Autoid reader has the behavior of a Server and is capable of providing up to 2 (two)

simultaneous TCP/IP connections for communication of the tag read data, in addition to the Serial

Interfaces RS232 and Wiegand/Abatrack, that is, up to two different software (processes) that are on the

same Ethernet network of the reader, can connect to it to receive the tag reading results. The TCP/IP

port number is configurable on the "Network" html page or via ascii command "DTPORT".

NOTE:

Some Anti-Virus and Firewalls may block the communication ports mentioned in the

illustration above, and it is not possible to send and receive data. To solve the

problem, add exceptions to the IP used by the reader.

NOTE:

TCP/IP port available for data receipt can be configured on the html page and by SLT

software.