User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
72 de 92
Configuring Communication (continued):
STRKP
SET/GET
Change or check the Keepalive String, maximum 15 characters, for more details
see section 10.1.
Note: You do not need to reboot the reader.
Example:
Direction
Description
Example:
Direction
Description
Example:
Direction
Description
$ SET STRKP=RN<CR>
Host → Reader
Host sends the message to change
the keepalive string.
$ OK<CR>
Host ← Reader
Reader responds with OK.
TMKP
SET/GET
Changes or checks the time in seconds of the Keepalive String send interval.
Values from 1 to 60s.
Note: You do not need to reboot the reader.
Example:
Direction
Description
$ SET TMKP=10<CR>
Host →
Reader
Host sends the message to change
the range to 10s.
$ OK<CR>
Host ← Reader
Reader responds with OK.
SYSLGTEMP
SET/GET
Changes or checks the sending of the internal temperature in °C from the rf module
of the reader to the Syslog. Values [ON, OFF].
Note: You do not need to reboot the reader.
Example:
Direction
Description
$ SET SYSLGTEMP=ON<CR>
Host →
Reader
Host sends the message to
enable the sending of the
temperature to Syslog.
$ OK<CR>
Host ← Reader
Reader responds with OK.
SYSLGTAG
SET/GET
Changes or verifies what should be sent in the 'tag' field of reader-generated
Syslog messages. [NAME] values to send the reader’s name and [DESC] to send
the reader description.
Note: You do not need to reboot the reader.
Example:
Direction
Description
$ SET SYSLGTAG=DESC<CR>
Host →
Reader
Host sends the message to send the
reader description in the 'tag' field of
syslog messages.
$ OK<CR>
Host ← Reader
Reader responds with OK.