User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

7 de 92

2 Introduction

2.1 About this guide

This user guide provides detailed information about the readers and is divided into two large parts, Part

1 with information for the physical installation (mechanical) of the reader and Part 2 with information on

the operation and operation of the reader, including programming and configuration.

2.2 Conventions used in this manual

This guide uses some typographic conventions:

NOTICE:

This type of warning shows the user that a particular action may cause

damage to the reader or result in the operation of the reader that

violates the regulatory requirements of the region.

ATTENTIO

This type of warning indicates that the reader is susceptible to

electrostatic discharges and appropriate precautions should be taken so

that no damage to the equipment occurs.

NOTE:

Important information and tips on the subject you are in.

2.3 Target audience

This document is intended for technology professionals and rf equipment installation who will be

responsible for installing the reader. Before installing, configuring, and operating the reader, you should

be familiar with:

1. Data communication between devices, including ethernet and WiFi interface.

2. Definitions of configuration, positioning of Reader and RFID Antenna.

3. Basic knowledge about network configuration in Operating Systems.