User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
66 de 92
MACDEC
MECHEX
GET
Checks the physical address of the reader's Ethernet interface in two formats,
decimal "MACDEC" and hexadecimal "MACHEX".
Example:
Direction
Description
$ GET MACDEC<CR>
Host →
Reader
Host sends the message to read the
MAC in decimal.
$ 0.36.119.81.147.94<CR>
Host ← Reader
Reader responds with the decimal value.
$ GET MACHEX<CR>
Host →
Reader
Host sends message to read MAC in
hexadecimal.
$ 00:24:77:51:93:5E<CR>
Host ← Reader
Reader responds with the value in hexa.
10.3.8 Setting Up Reading
RDMD
SET/GET
Changes or checks the read mode that will be used by the reader. [AUTO] values
for continuous read mode and [TRIGGER] for read-only trigger mode in vehicle
detection.
Note: You do not need to reboot the reader.
Example:
Direction
Description
$ GET RDMD<CR>
Host →
Reader
Host sends the message to check which
read mode is running by the reader.
$ AUTO<CR>
Host ← Reader
Reader responds with continuous
reading mode.
$ SET TDMD=TRIGGER<CR>
Host →
Reader
Host sends the message to change the
read mode to Trigger.
$ OK<CR>
Host ← Reader
Reader responds OK, successful
change.