User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
64 de 92
Example:
Direction
Description
$ GET DNS1ADDR<CR>
Host → Leitor
Host sends the message
to verify the address
of the DNS server.
$<CR>
Host ← Reader
Reader responds with the
value of the address; in this
case it is empty.
$ SET DNS1ADDR=192.168.0.15<CR>
Host →
Reader
Host envia a mensagem
para alterar o endereço IP
do servidor DNS.
$ OK<CR>
Host ← Reader
Reader responds OK.
Setting Up Network (continued):
NTP1ADDR
SET/GET
Changes or verifies the name or IP address of the SNTP server for synchronization
of the reader's internal clock.
Note: You do not need to reboot the reader.
Note: If a name is used in this parameter, the DNS server must be configured correctly.
Example:
Direction
Description
$ GET NTP1ADDR<CR>
Host → Reader
Host sends the message to
change the Autoid security code.
$ a.st1.ntp.br<CR>
Host ← Reader
The reader returns with the name
to change the name of the SNTP
server.
$ SET
NTP1ADDR=b.st1.ntp.br<CR>
Host → Reader
Host sends the message to
change the name of the SNTP
server.
$ OK<CR>
Host ← Reader
Reader responds with OK.
SYSLGADDR
SET/GET
Changes or verifies the name or IP address of the SYSLOG server to receive log
messages from the reader.
Note: You do not need to reboot the reader.
Note: If a name is used in this parameter, the DNS server must be configured correctly.
Example:
Direction
Description
$ GET SYSLGADDR<CR>
Host →
Reader
Host sends the message to
check the Syslog server.
$ <CR>
Host ← Reader
Reader returns with the
Syslog address, in this
case empty, there is no
servidor cadastrado.