User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
62 de 92
TMALIVE
TMALIVEFMT
GET
Verifica o status da conexão da porta de comunicação de dados.
Example:
Direction
Description
$ GET TMALIVE<CR>
Host → Reader
Host sends the message.
$ 80577<CR>
Host ← Reader
80577 seconds without rebooting.
$ GET TMALIVEFMT<CR> Host → Reader Host sends message.
$ 0d 22:23:00<CR> Host ← Reader Time in days min hours. Mon.
10.3.6 Configuring Security
RDRDSC
SET/GET
Changes or verifies the reader description, which must be a maximum of 30 characters.
Note: You do not need to reboot the reader.
Example:
Direction
Description
$ SET RDRDSC=Entrada Frontal<CR>
Host → Reader
Host sends the message to change
parameters.
$ OK<CR>
Host → Reader
Reader responds with OK, that is,
parameter changed successfully.
$ GET RDRDSC<CR> Host → Reader Host envia a mensagem.
$ Entrada Frontal<CR> Host ← Reader Leitor responde com valor do parâmetro
CODSEC
SET/GET
Altera ou verifica o código de segurança Autoid, que deve possuir valor numérico
de seis dígitos.
Nota: não necessita reinicializar o leitor.
Example:
Direction
Description
$ SET CODSEC=FF0102<CR>
Host → Reader
Host sends the message to change
the Autoid security code.
$ ERROR<CR>
Host ← Reader
The reader returns error because the
code must be numeric
$ SET CODSEC=900167<CR>
Host → Reader
Host sends the message to change
the Autoid security code.
$ OK<CR>
Host ← Reader
The reader returns OK, that is, the
parameter has changed.
AUTOID
SET/GET
Changes or checks the type of Autoid System that the reader will perform to do tag
readings. [NORMAL] values for Autoid Normal,[SECURE] for Autoid Safe and
[HYBRID] for Autoid Hybrid.
Note: You do not need to reboot the reader.