User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
57 de 92
IO parameters:
Parameter
Description
Lógica invertida do
sinal de entrada
trigger
Reverses the trigger signal trigger ing logic (the NF contact of the lens can be
used for example).
Factory configuration: not selected (normal logic).
IO (Relé)
parameters:
Parameter
Description
Pulse Duration
Set pot tag reading
When the reader is initialized, in which logical state the digital outputs should be
configured.
Note: Parameter used only when the "Communication interface type" is
"None(GPO)".
Factory setting: Low level (0V).
10.2.7 Setting Date and Time
1. After login click Date and Time.
2. Change the parameters.
3. Click Apply to save the changes.
4. If you see the message prompting you to restart the reader, click Restart.
Date and Time parameters: