User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
50 de 92
Parameter
Description
Ethernet Mode
Defines the behavior of the reader on the network, and can act as
server or client.
Factory configuration: Server
IP address
Fixed IP address of the reader, this version of the reader does not
support DHCP.
Factory configuration: 169.254.xx.xx (Local Address Link, last two
of the
MAC)
Network mask
IP address of the subnet mask, devices on the same subnet can
communicate locally without routing.
Factory configuration: empty
Gateway Address
IP address of the gateway to the local network, is usually the address of
the router.
Factory configuration: empty
DNS Server
IP address of the DNS server, will be the server queried to resolve
names.
Factory configuration: empty
SNTP Server
Name or IP of the SNTP server, will be the server queried to
synchronize the internal clock.
Factory setup: a.st1.ntp.br
SYSLOG Server
Name the IP of the SYSLOG server that will receive the log messages
from the reader.
Factory configuration: empty
TCP Data Communication
Port
Number of the port where up to two concurrent connections are
accepted for receiving the Read String.
Factory configuration: 8080
TCP Port Configuration
Port number where a connection is accepted for ascii message
configuration.
Factory configuration: 9090