User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

48 de 92

Security page parameters (Continued):

Parameter

Description

Autoid system type

Type of reading algorithm that the reader will run.

Normal: The reader does not check any kind of security in reading the

tags, it reads any standard ISO-18000-6C tag (UHF Gen2) in its reading

field and reports on its communication interfaces.

Secure: The reader verifies that the standard ISO-18000-6C tag (UHF

Gen2) has a previously recorded "Autoid Security Code" and reports on

its communication interfaces only the tags validated with this security

code, which is unique to each end user of the System.

Hybrid: The reader performs the two modes mentioned above.

Factory setup: Secure

Autoid security code

Six-digit numeric security code linked to tags written with that same

code. Only tags with the same security code will be read by the reader.

Note: Parameter used only when the "Autoid System Type" is

"Safe"

Factory setup: 900001