User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

46 de 92

RFID Hardware

Hardware version of the RF module of the reader.

AutoID Version

Firmware version of the reader's internal controller.

Status parameters (Continued):

Parameter

Description

MAC Address

Physical address of the Ethernet interface, consisting of 6 bytes, is

shown in decimal and hexadecimal format.

Ethernet Mode

Indicates whether the reader is configured as Client or Server.

TCP Connection #

Communication

The reader accepts up to 2 simultaneous TCP/IP connections on the

port configured on "TCP Port Data Communication" to receive tag read

data.

Reader description

Alphanumeric characters of a maximum of 30 digits that describe the

reader, for example its installation location.

Reader name

Name generated automatically by the reader, EDGE-30R + the last six

digits of the MAC.

Reader Status

Shows the last state of the reader.

Region

Shows which region (frequencies allowed) the reader is using.

Reader Date and Time

Shows the current date and time of the reader.

Last SNTP sync

Shows whether the reader was able to synchronize with the configured

SNTP servers.

Reader uptime

Displays how long the reader is running without serious errors or without

being rebooted.

Internal reader

temperature

Shows the temperature of the RF module internal to the reader, the

body temperature of the reader is usually 15 to 20°C lower.