User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

45 de 92

NOTE:

Only one user is able to connect to the reader configuration page. Login to the setup

page expires after 3 (three) minutes. Thus, if another user wants to connect, they

must wait for the first user to log out or pass the expiration time without any update

on the page.

NOTE:

Network segment 169.254.0.0/16 must be configured on the network interface

computer.

NOTE:

Always write down the settings saved in the reader, such as the IP and login password for

access to the reader.

10.2.1 Checking the status of the reader

After login, the configuration home page with the equipment status parameters will be displayed.

Below are the descriptions of the reader configuration parameters that can be checked and/or changed

via browser and also using ASCII commands.

10.2.1.1 Status Parameters

Parameter

Description

RFID Firmware

Firmware version running on the RFID module of the reader.

RFID Bootloader

Bootloader version running on reader RFID module.