User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

4 de 92

11.1 TCP/IP connections to receive tag readings 76

11.2 TCP/IP connection, disconnection, and reconnection logic 77

11.3 Format of reading results via TCP/IP and RS232 78

11.4 Syslog 79

12 Mensagens de Log do leitor - Syslog 81

13 Regional Regulations 82

13.1 Frequencies and operating region 82

13.2 RF reader power 82

14 Integrated antenna measurements 83

14.1 VSWR 83

14.2 Axial Ratio (±20° Azimuth) 902MHz 84

14.3 Axial ratio (±20° Elevation) 902MHz 84

14.4 Axial ratio (±20° Azimuth) 915MHz 85

14.5 Axial ratio (±20° Elevation) 915MHz 85

14.6 Axial ratio (±20° Azimuth) 928MHz 86

14.7 Axial ratio (±20° Elevation) 928MHz 86

14.8 Radiation diagram (Azimuth) 902MHz 87

14.9 Radiation diagram (Elevation) 902MHz 87

14.10 Radiation diagram (Azimuth) 915MHz 88

14.11 915MHz Radiation Diagram (Elevation) 88

14.12 Radiation diagram (Azimuth) 928MHz 89

14.13 928MHz Radiation Diagram (Elevation) 89

15 Solutions to common problems 90

15.1 I do not know the IP of the Reader 90

15.2 I do not know the password of the reader's page 90

15.3 Cannot connect to the Reader via Ethernet 90

15.4 In trigger mode, the input signal is not being activated by the sensor 91

15.5 The Reader is not reading tags 91