User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
3 de 92
8.2 Electrical connections - Reader 31
8.3 Electrical connections - PCI 33
8.4 Electrical connections - Ethernet LAN 34
8.6 Electrical connections - Digital input (Sensor) 36
8.7 Electrical connections - Relé 37
8.8 Reader visual indicators 38
8.8.1 STATUS visual indicator 38
8.9 POE Injector Visual Indicators 39
Parte 2 - Operation and operation 40
9 Modes of operation of the reader 41
9.1 Continuous reading mode 41
9.2 Trigger read mode 42
10 Configuring the Readear 43
10.1 Reader IP address 43
10.2 Configuring the reader via web browser 44
10.2.1 Checking the status of the reader 45
10.2.1.1 Status Parameters 45
10.2.2 Security Settings 47
10.2.3 Setting up the network 49
10.2.4 Setting Up Reading 51
10.2.4 Setting Up Communication 53
10.2.6 Configuring IO 56
10.2.7 Setting Date and Time 57
10.3 Configuring reader via ASCII messages 58
10.3.1 Operating logic 58
10.3.2 Syntax of messages and replies 58
10.3.3 Checksum of messages 59
10.3.4 Example of use 60
10.3.5 Checking the status of the reader 60
10.3.6 Configuring Security 62
10.3.7 Setting Up Network 63
10.3.8 Setting Up Reading 66
10.3.9 Setting Up Communication 71
10.3.10 Configuring GPIO 73
10.3.11 Miscellaneous settings 74
11 Data communication 76