User's Guide
Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
2 de 92
1 Products covered by this manual 5
1.1 Approval note 5
1.2 Legal Notice 6
1.3 About Acura 6
2 Introduction 7
2.1 About this guide 7
2.2 Conventions used in this manual 7
2.3 Target audience 7
3 Introduction to equipment 8
4 Table of revisions 9
4.1 User guide table 9
4.2 Readers firmware table 10
4.3 Readers hardware table 13
5 Installation notes and important warnings 13
Part 1 - Overview and installation 14
6.1 Hardware - Edge-30R+ and Edge-30R-N+ Readers 15
6.2 General reader characteristics 16
6.3 Hardware - PCI interface 18
6.4 General features of pci interface 19
7 Mechanical installation 20
7.1 Reader attachment support 20
7.1.1 Fixing bracket items 20
7.1.2 Fixing the pole base 1" to 1.75" or 1.75" to 3" diameter and wall 21
7.1.3 Fixing the support base on edge-30R+ and Edge-30R-N+ readers 22
7.1.4 Fixing the bracket arm at the base of the pole/wall 23
7.1.5 Degrees of freedom of mechanical support 24
7.2 Positioning of readers 25
7.2.1 Side of the track 25
7.2.2 Track center 26
7.3 Reading problems 27
7.4 Food and Communication 28
7.5 Mechanical installation of pci interface 29
7.6 Dimensions of PCI interface 29
8 Eletrical Intallation 30
8.1 General diagram of electrical connections 30