User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid

Rev. 13

17 de 92

Data / Control Interface (continued)

GPIO

1x Opto-isolated Digital Input:

1KV RMS insulation

Supports Dry Contact, NPN (Sinking) and PNP circuit

(Sourcing). Minimum pulse width: 100ms

High Level (3.0 to 24.0VCC), Low Level (0 to 2.0VCC)

1x Digital output opto-insulated by relin:

High Level 24VCC

RL_NC (Normal Contact Closed)

RL_CM (Common Contact)

RL_NO (Open Normal Contact)

Programming

Does not require SDK/API, the reader works automatically by

sending the reading result via Ethernet.

Energy

Compatible with IEEE802.3af standard (15.4W)

10/100/1000M PoE Injector

Consumption

Maximum 15W

With maximum power and high duty cycle.

Physical characteristics

Degree of protection of the reader

IP67 (Considering the RJ45 PLUG properly connected)

Integrated antenna

Edge-30R+: 7.5 dBic gain, RHCP Circular Polarization

Edge-30R-N+: 7.5 dBic gain, RHCP Circular Polarization

Dimensions

Edge-30R+: 215x215x83 mm [LxAxP]

Edge-30R-N: 190x190x77mm [LxAxP]

Operating temperature

-10°C a + 65°C

Storage temperature

-10°C a + 70°C

Relative humidity of the air

95%

Fixation

With support on the back for poles (Ø 1" to 1.75" and 1.75" to 3")

or flat surfaces (wall)