User's Guide

Guia de usuário Edge-30R+ Autoid / Edge-30R-N+ Autoid
Rev. 13
Copyright © 2022 Acura Technologies
12 de 92
Changed the feedback patterns of the status and link LEDs;
Security Change, there is now a default password acura@autoid , it
is no longer allowed to be without any password, changed the page
hmtl Security, the password can have up to 16 chars;
Included Duty Cycle RF (RFon/RFoff) compensation logic according
to the reader's temperature increase;
Improvements in internal error treatments.
3.0.1
02/2016
Implemented in a single firmware, the two Systems Autoid, Normal
and Safe;
Added English language for html pages;
Some time parameters have changed to have drive in seconds;
The maximum trigger read time value was changed to 600s before
was 65s;
Implemented configuration protocol through ASCII messages;
Fixed a bug in the keepalive sending algorithm;
Removed delay of 100ms between Wiegand or Aba transmissions
when the chosen communication interface is "None".
2.0.4
09/2015
Implemented Syslog protocol (RFC 5424) for sending reader log
messages;
Eliminated the status ports that sent the log messages, now the
protocol is Syslog;
Implemented DNS protocol for name resolution;
Implemented automatic name of the reader;
The Read Result String is now the same as the one sent via TCP/IP
and ;
Added key words to the Data String and keepalive;
Taken from the end-of-line settings for the Data String and keepalive,
control characters can now be placed in strings by the keywords.
2.0.3
06/2015
Restructuring of html configuration pages;
Immediate execution of parameter changes without the need for
reader reboot;
The Ethernet communication port number for the read results and
reader status are now configurable;
Accepts two simultaneous TCP/IP connections on the port configured
to receive read data;
The read result string that is sent via TCP/IP can now be customized
using keywords;
Included a number of receive buffers for the TCP/IP sockets of the
reader to avoid the "Zero Window" events in the TCP/IP Ethernet
protocol.
2.0.2
03/2015
Creation and release of the firmware.