User`s manual

ACUBRITE™ 23 SS Manual ACUBRITE™ 23 SS Manual
Image Adjust This item can adjust video color as Brightness,
Contrast, Saturation Hue, Sharpness.
Audio This item can adjust audio function. As Volume,
Mute, Treble, Base, Balance .
System This item can Select Source input (PC,) and
Recall System data .
OSD This item can control OSD window function. As OSD
H-Position,OSD V- Position, OSD Transparence
and OSD Off time .
All functions adjustment are same as PC mode
Quick Installation & Troubleshooting Tips
Please follow the following descriptions step by step.
(The 6 diagrams can also be your references):
Step 1 Step 2 Step 3 Step 4 Step 5 Step 6
Page 11
Step 1 Plug one terminal of the VGA cable to the signal connector at the
rear of the LCD Monitor.
Step 2 Plug the other terminal of the VGA cable to the signal connector at
the rear of PC.
Step 3 Plug Adapter output to the jack at the rear of LCD Monitor.
Step 4 Plug the Power cord to the Adapter.
Step 5 Connect the Power cord to power outlet.
Step 6 Turn on the LCD Monitor and PC.
In the event that you experience trouble with your Display, check the following items
before contacting the dealer from whom the Display was purchased. The most
common problems usually involve an incorrectly an incorrect connection from the Video
Card to the Display. We recommend that you also consult your Video Card User’s
manual during the Troubleshooting Procedure. Do not exceed the maximum refresh
rate recommended for the display.
Page 12