Specifications

Configuring the DataBridge SDR2-CF SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0

Both SDR2-CF ports support baud rates up to 230,400 bps and RTS/CTS

hardware handshaking for reliable high-speed communication. Your SDR2-

CF is also equipped with a real-time clock, power-saving features, non-

volatile memory, and a resume-on-power failure feature. The SDR2-CF

features a one-button front panel user interface that starts and stops

recording.

1.2 Before you start

Before you start, be sure you have the following items available:

• DataBridge SDR2-CF or SDR2-OEM-CF board

• A 5VDC regulated or 7-30VDC power supply

• RS-232 DB9 serial cable(s)

• A computer or terminal with an available serial port

1.3 A quick guide to the DataBridge SDR2-CF

On the front of the SDR2-CF are the CF socket, record button, and LED

indicators. The SDR2-CF can be toggled in and out of record mode using

the record button located on the front panel. The LED indicators show the

SDR2-CF’s current recording status. The data indicator flashes when data is

received and is used to verify data reception from your data source.

Figure 1.1. SDR2-CF Front Panel Controls.