Specifications

Service and Support SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0
50
Exception 5: Hardware Error
Usually occurs when the SDR2-CF cannot reset the CompactFlash card.
Try ejecting and reinserting the card or using a new card and contact
Acumen if problem persists.
Exception 6: EEPROM Error
Rare hardware error. Contact Acumen to discuss repair or replacement.
Exception 7: Cache Error
Rare hardware error. Contact Acumen to discuss repair or replacement.
Exception 8: Buffer Error (firmware error)
Rare error that may occur in customized or beta firmware versions. Contact
Acumen to report.
Exception 9: Tasking Error (firmware error)
Rare error that may occur in customized or beta firmware versions. Contact
Acumen to report.
Exception 10: ATA/CompactFlash Error
The CompactFlash media has reported a fatal error to the SDR2-CF.
Reinsert/replace the media and contact Acumen if problem persists.
Exception 11: Directory Creation Error
Rare. The SDR2-CF cannot create the subdirectory files are to be recorded
to. Try using a different directory name or reformatting the media.
Exception 12: FAT12 File System Detected
The SDR2-CF has determined that the CF card was formatted using the
FAT12 file system, which is unsupported. Reformat the CF card using the
/A:512 option (Windows 2000/XP) and retry.
Exception 13: FAT32 File System Detected
The SDR2-CF has determined that the CF card was formatted using the
FAT32 file system, which is unsupported. Reformat the CF card using the
/FS:FAT option (Windows 2000/XP) and retry.