Specifications

Configuration Menu Reference SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0
28
Figure 4.1. The DataBridge SDR2--CF configuration menu.
4.1.1 Set Time
To update the real-time clock’s time, type 1 at the menu prompt. When
prompted further, enter the time in 24-hour format using two digits for each
of hours, minutes, and seconds (omit the colons (:) between each field).
Press any key to return to the SDR2-CF main menu. For an example, see
Figure 2.1.
4.1.2 Set Date
To update the real-time clock’s date, type 2 at the menu prompt. When
prompted further, enter the date in MM/DD/YYYY format using two digits
for each for month and day, and four digits for year (omit the slash (/)
between each field). Press any key to return to the SDR2-CF Configuration
menu. For an example, see Figure 2.2.
4.1.3 Toggle ANSI Mode
ANSI mode provides an easy to read user interface for your SDR2-CF and is
enabled (or disabled) by typing 3 from the Configuration menu. Make sure
you have ANSI mode enabled in your terminal software for proper display of
the menus. The current state of ANSI mode is indicated on the menu.
4.1.4 Toggle Messages
For convenience and testing, all messages can be globally activated or
deactivated by typing 4 from the Configuration menu. Globally turning the