Specifications

SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0 Configuring the DataBridge SDR2-CF
15
submenu (see Figure 2.4). You can use Option 3 to change directory
without having to retype the filename.
From the File System Functions menu, press 2. Then, when prompted,
backspace over the current filename/path and type a filename, pressing the
<Enter> key when finished or <Esc> to cancel changes. If your filename
is not 8+3 compliant, the SDR2-CF does its best to make it compliant. You
can return to the main menu by typing Q.
Figure 2.4. Changing the current filename.
2.4 Setting recording parameters
The SDR2-CF's recording parameters submenu allows you to control how
and when new files are created, how the SDR2-CF handles a full CF card, if
incoming data is date/time stamped, and how the SDR2-CF handles a power
failure. To enter the Recording Parameters submenu, press 6 from the main
menu prompt.