Specifications

SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0 Configuring the DataBridge SDR2-CF

2. Configuring the

DataBridge

SDR2-CF

Now that you have access to the SDR2-CF’s menu system, you are ready to

configure it for use with your serial data source. Using the Configuration

menu, you can:

• Set the date and time.

• Specify a directory to record files to.

• Specify a filename for recording.

• Ensure that the media you are using is properly formatted and has

enough free space to accommodate your data.

• Verify that the SDR2-CF and your device are communicating at the

same speed and with the same serial data format parameters.

• Communicate with your serial data source connected to the device port.

• Set up output messages for your serial device.

Before you begin, be sure you have the documentation available for the

device you’ll connect to your SDR2-CF. If possible, be sure you can

communicate with the data source using the supplied software and/or your

communications software. An intimate knowledge of your data source's

communications standards will make connecting it to the SDR2-CF simple.