Cov lus qhia

ManualsBrandsAcuityBrands ManualsAppAcuityBrands SmartThings App

Commissioning Instructions JunoConnect Wafer

Detailed Instructions for SmartThings without a hub

1. Download the SmartThings app to your phone or tablet from the IOS app store or Google play store.

2. Create an account with SmartThings to get started.

4. From the main window select

the “+” at the top right corner

to add a new device.

3. Once your account is created

re-start the app.

5. Select “Device” to add a new

device.

6. Set search by brand and

search for “Juno Connect”

Summary of content (5 pages)

PAGE 1
TM Commissioning Instructions JunoConnect Wafer Detailed Instructions for SmartThings without a hub 1. Download the SmartThings app to your phone or tablet from the IOS app store or Google play store. 2. Create an account with SmartThings to get started. 3. Once your account is created re-start the app. 5. Select “Device” to add a new device. 4. From the main window select the “+” at the top right corner to add a new device. 6.
PAGE 2
TM Commissioning Instructions JunoConnect Wafer 7. Select lighting from the list of available devices under Juno Connect. 10. Once the app is ready press “Start”. 8. Select Wafer as the device to onboard. 11. To connect your Wafer using a phone (Bluetooth) select “Connect device to phone” option. 9. SmartThings will automatically get the drivers from the cloud. (make sure you are connected to the internet). 12. Select your home and room to place the Wafer. Then press “Next”.
PAGE 3
TM Commissioning Instructions JunoConnect Wafer 13. After scanning your Wafer will be discovered by the app. Press the “Juno Connect Wafer” to continue. 16. Once the Wafer is commissioned SmartThings registers your product to the cloud. (Make sure you have an internet connection). 14. On iOS devices a Bluetooth pair request will appear. Press “Pair”. 17. Once onboarded you may rename the Wafer. 15. SmartThings will establish communication with the Wafer. Make sure you are in the same room as the Wafer.
PAGE 4
TM Commissioning Instructions JunoConnect Wafer Detailed Instructions for SmartThings with a hub 1. Follow steps 1-10 from “Samsung SmartThings without a Hub” app to your phone or tablet from the IOS app store or Google Play store.” 2. To connect your Wafer using the SmartThings Hub, select “Connect to (SmartThings)” option. 4. After scanning your Wafer will be discovered by the app. Press the “Juno Connect Wafer” to continue. 3. Select your home and room to place the Wafer. Then press “Next”. 5.
PAGE 5
TM Commissioning Instructions JunoConnect Wafer 6. Once onboarded you may rename the Wafer. One Lithonia Way, Conyers, GA 30012 | Phone: 770-922-9000 | www.acuitybrands.com © 2021 Acuity Brands, Inc. All rights reserved. | JUN 878950.02_0821 7. Once re-named the Wafer tile will appear in your home. The process is now complete. will appear in your home. The process is now complete.