Bruksanvisning

Page 4 of 7
912-00089-002
LED IM PORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS LBK
TROFFER
M inimum dimensions of the host housing
This Retrofit Kit is designed to fit housings with
minimum dimensions:
2.3 inches
4.9
inches
W ARN
ING
–
Risk of fire or electric shock. Luminaires w iring, ballasts, or other electrical parts may be damaged when drilling for
inst allation of reflector kit hardware. Check for enclosed wiring and com ponent s.
W ARNING – Risk of fire or electric shock. Install t his kit only in luminaires that have the const ruct ion feat ures and dimensions
shown in the phot ographs and/ or drawings and where the input rating of the Ret rofit Kit does not exceed t he input rating of t he
luminaire
. W ARNING – To prevent wiring damage or abrasion, do not expose wiring t o edges of sheet metal or ot her sharp objects.
* * * Locate t he fluorescent lighting fixture that is t o be ret rofitt ed. Turn off power.
W ARNING – Electrical shock can occur during ret rofit component inst allation if power is not turned off.
W ARNING – Risk of fire or electric shock. LED Retrofit Kit inst allation requires knowledge of luminaires electrical systems. If not
qualified, do not att empt installation. Cont act a qualified electrician.
W ARNING – As indicated in t he individual inst allation instruction: Do not make or alter any open holes in an enclosure of wiring
or electrical component s during kit installation or Only those open holes indicated in the photographs and/ or drawings may be
made or altered as a result of kit installation. Do not leave any ot her open holes in an enclosure of wiring or electrical
component s.
W ARNING – Ensure that existing fixture is and rem ains properly connected to building ground. Use of any ot her than Acuit y
Brands supplied screw s to inst all assembly may result in ungrounded fixture components.
Pre-Launch