User Manual
Table Of Contents
- VUE Key Layout
- VUE Soft keys
- Single Axis VUE Tool, and Datum keys
- Readout Parameter Access Code
- Access to Machine Parameter Operations
- Introduction
- Software Version
- VUE
- Symbols within Notes
- VUE Fonts
- Warranty
- Warranty Information:
- I – 1 Fundamentals of Positioning
- Datums
- Actual Position, Nominal Position, and Distance-To-Go
- Absolute Workpiece Positions
- Incremental workpiece positions
- Zero Angle Reference Axis
- Reading head position
- Encoder Reference Marks
- I – 2 General Operations for VUE
- Screen Layout
- VUE Hard Keys
- Power Up
- Reference Mark Evaluation
- Working without reference mark evaluation
- ENABLE/DISABLE REF function
- Operating Modes
- Setup
- Job Setup Parameters
- Units
- Scale Factor
- Mirror
- Diameter Axes
- Near Zero Warning
- Status Bar Settings
- Job Clock
- Console Adjustment
- Language
- Import/Export
- Set/Zero Soft Key
- I – 3 Milling Specific Operations
- Key Functions Detailed
- Tool Hard Key
- Tool Table
- Import/Export
- Tool Radius Compensation feature
- Sign for the length difference DL
- Calling the Tool from the Tool Table
- Datum Setting
- Datum Setting with a Tool
- Presets
- Absolute Distance Preset
- Preparation:
- Incremental Distance Preset
- 1/2 Hard Key
- Circle, and Linear Pattern
- Functions for milling pattern soft keys
- Circle pattern
- Linear Pattern
- Incline & Arc Milling
- Incline Milling
- Arc Milling
- I – 4 Turning Specific Operations
- Key Functions Detailed
- Tool Table
- Tool Display Icon
- Setting Tool Offsets with Tool/Set
- Import/Export
- Setting Tool Offsets with Lock Axis Function
- Calling a Tool from the Tool Table
- Datum Setting
- Setting Datums using LOCK AXIS Function
- Taper Calculator Hard Key
- Presets
- Radius/Diameter Soft Key
- Vectoring
- Coupling
- Z Coupling (turning applications only)
- Enabling Z Coupling
- Disabling Z Coupling
- II – 1 Installation Setup
- Installation Setup Parameters
- Exporting the current Installation Setup:
- Importing a new Tool Table
- Encoder Setup
- Display Configuration
- Error Compensation
- Linear Error Compensation
- Non-Linear Error Compensation
- Starting a Non-linear Error Compensation Table
- Configuring the Compensation Table
- Reading the Graph
- Viewing the Compensation Table
- Exporting the Current Compensation Table
- Importing a New Compensation Table
- Backlash Compensation
- Counter Settings
- Diagnostics
- Keypad Test
- Display Test
- II – 2 Installation and Electrical Connections
- Installation
- Electrical requirements
- Environmental
- Preventative maintenance
- II – 3 Dimensions
- Overview
- Accessory ID Number
VUE xi
Enabling Z Coupling .......................................................................................... 38
Disabling Z Coupling ......................................................................................... 38
II – 1 Installation Setup
Installation Setup Parameters................................................................................ 40
Exporting the current Installation Setup:........................................................... 40
Importing a new Tool Table .............................................................................. 40
Encoder Setup ....................................................................................................... 41
Display Configuration............................................................................................. 42
Error Compensation............................................................................................... 42
Linear Error Compensation ............................................................................... 43
Non-Linear Error Compensation........................................................................ 44
Starting a Non-linear Error Compensation Table............................................... 44
Configuring the Compensation Table................................................................ 44
Reading the Graph ............................................................................................ 44
Viewing the Compensation Table ..................................................................... 45
Exporting the Current Compensation Table...................................................... 45
Importing a New Compensation Table ............................................................. 45
Backlash Compensation ........................................................................................ 45
Counter Settings.................................................................................................... 46
Diagnostics ............................................................................................................ 46
Keypad Test ...................................................................................................... 46
Display Test ...................................................................................................... 46
II – 2 Installation and Electrical Connections
Installation.............................................................................................................. 47
Electrical requirements ..................................................................................... 47
Environmental................................................................................................... 47
Preventative maintenance ................................................................................ 47
II – 3 Dimensions
Overview ............................................................................................................... 48
Accessory ID Number....................................................................................... 48