Instruction Manual

ii
Controls of the MILLPWR
G2
Controls of the MILLPWR
G2
Keys on console
Motion control keys
Data Entry keys
Function keys
Numerical keys
Axis Keys
Soft Keys
Key Function
GO key (e.g. run a program).
STOP key (duel function: press once to
pause, press twice to stop a program).
Key Function
CANCEL key cancels operation, i.e. form.
CLEAR key clears selections, i.e. values in
a field, a program step.
USE key completes operation, i.e. data
entered in a form.
ENTER key completes selection, i.e.
values entered in a field.
Key Function
ABS/INCR key toggles between Absolute
or Incremental positioning.
DRO/PGM key toggles between the DRO
display or Program mode display.
VIEW key opens menu for setting part
graphic display parameters, i.e. type,
orientation.
INFO key opens on-screen manual.
MM key toggles between INCH or MM
mode.
SETUP key opens configuration menu.
Key Function
ZERO key.
ONE key.
TWO key.
THREE key.
FOUR key.
FIVE key.
SIX key.
SEVEN key.
EIGHT key.
NINE key.
DECIMAL key.
PLUS / MINUS key.
Key Function
AXIS keys open the datum, or preset
form.
Key Function
SOFT KEYS performs the function directly
above it.