Instruction Manual

PROGRAM STEPS

MILLPWR

Arc

An arc can be defined several ways:

• With a from point, to point

and a radius

• With a from point, to point

and a center point

• With from, to, and 3rd points along

the arc

• With a from or to point, center point

and a sweep angle.

Choose a method based upon the information available from the print.

As you are programming, keep in mind that the arc's sweep angle is measured from the

X-axis.

o program an arc:

• Press the ARC key.

• Enter the beginning coordinates for the X-

and Y-axes in the “From” field.

• Enter the ending coordinates for the X-

and Y-axes in the “To” field.

• Enter a depth.

Operation Manual

5-8