Instruction Manual

DEMONSTRATION
MILLPWR
®
Operation Manual
4-3
Consider
entering a
Position/Drill
step before the
Set Tool step.
This will enable
you to go to a
location away
from the work-
piece to change
tools.
Also, leave the
diameter blank
and
MILLPWR
will ask for the
tool diameter
when you run
the program.
• Arrow down to SPINDLE.
• To use a forward spindle direction.
Press the
FORWARD softkey then
press the
ENTER key.
• Set the cutter’s spindle speed for 1300 RPM.
• Press the
USE key.
You don't have to press the
ENTER key after the last
value—you can just press USE.