Instruction Manual

PROGRAMMING
MILLPWR
®
Operation Manual
3-6
The View Key
To see part graphics in more detail, press the
VIEW key to access the following softkeys:
FOLLOW TOOL
The FOLLOW TOOL softkey will automatically adjust the part graphic so that the tool is
always in view during Dry Run and the execution of the program.
SHOW TOOL PATH
The SHOW TOOL PATH softkey shows the tool's cutting path during the Dry Run and execu-
tion of a program. With this feature enabled, the toolpath remains highlighted.
ZOOM IN, ZOOM OUT and RESTORE
The ZOOM IN softkey will magnify the part graphic. The arrow keys will adjust the view,
up, down, left and right. The
ZOOM OUT softkey will de-magnify the part graphic.
RESTORE will return the part graphic to its original size.
T
ip:
Use FOLLOW TOOL, SHOW TOOL PATH and ZOOM functions simultaneously.
Press the
VIEW key (or the CANCEL key) to return to the PGM screen.