Instruction Manual

PROGRAMMING
MILLPWR
®
Operation Manual
3-5
• After entering all the data for a step, press the USE key to add the step to the program.
This immediately updates the part graphic and positions the cursor for the next step.
To exit a milling function without completing it, simply press the
CANCEL key.
• To edit a step, use the arrow keys to highlight the step and press
ENTER. After making
changes, press
USE to accept the changes.
• To delete a step, highlight the step to be deleted, then press
CLEAR.
• To insert a step between the two existing steps, position the cursor on the lower step, and
press the desired milling function key.
In addition to the milling functions, the MORE STEPS softkey displays a number of other useful
steps, such as
CUSTOM POCKET, ISLAND, MIRROR, REPEAT and ROTATE—each of which are
described in the Program Steps section of this manual.