Instruction Manual

PROGRAM STEPS

MILLPWR

Operation Manual

Frame

A circular frame is determined by its center point and radius. The direction will

determine if you are climb cutting or conventional cutting. The tool offset will deter-

mine if you are cutting an inside or outside frame.

o program a circular frame:

• Press the CIRCLE key.

• Press the

FRAME softkey.

• Enter the X- and Y-axes coordinates for the center

point.

• Enter the depth.

• Enter the radius.

• For the direction, press the

CW softkey for

clockwise or the CCW softkey for a counter-clock-

wise direction.

5-23

INSIDE

FRAME

OUTSIDE

FRAME