Manual
Table Of Contents
- Controls of the 3500i
- Manual Information
- Introduction
- Machining Fundamentals
- Manual Data Input
- Tool Management
- 4.1 Tool Table
- 4.2 Tool Data
- Program Management
- Conversational Editing
- Programming: Canned Cycles, sub-programs
- 7.1 Explaining Basic Cycles
- Round/Chamfer
- Rapid
- Line
- Arc
- Dwell:
- Plane Selection
- Reference Point Return:
- Fixture Offset (Work Coordinate System Select):
- Unit (Inch/MM)
- Dimension (Abs/Inc)
- Absolute Zero Set
- Block Form
- Temporary Path Tolerance
- System Data
- FeedRate
- FeedRate (4th-Axis)
- Spindle RPM
- M - Functions
- Tool Definition and Activation
- Repeat Blocks
- 7.2 Canned Cycles
- 7.3 Probing Cycles
- 7.4 Sub-programs
- 7.1 Explaining Basic Cycles
- Drawing Programs
- Running a Program on the Machine
- CAM: Programming
- 10.1 CAM Programming
- CAM Mode
- Recommended CAM Programming Sequence
- CAM Mode Mouse Operations
- CAM Mode Screen
- Activating CAM Mode
- Creating a New Program
- Tool Path Data Input
- Quick Coordinate Entry
- Job Setup: Basic tab
- Job Setup: Advanced tab
- Comment Tab
- Block Form: Basic tab
- Comment Tab
- Drilling Cycle:
- Drilling dialogue:
- Mill Cycle
- Pocket Cycle
- Pocket Finish Cycles
- Engraving Cycle
- Program Directive
- Modifying Toolbar
- Viewing Tools
- CAM Mode buttons
- CAM Setup
- Geometry
- DXF Import Feature
- Modifying Tools
- Shapes
- Tool Table
- Tool Paths
- CAM Example 1
- CAM Example 2
- 10.1 CAM Programming
- G-Code Edit, Help, & Advanced Features
- 11.1 G-Code Program Editing
- 11.2 G-Code and M-Code Definitions
- 11.3 Edit Help
- 11.4 Advanced Programming
- SPEED
- M - Functions
- Order of Execution
- Programming Non-modal Exact Stop:
- In-Position Mode (Exact Stop Check):
- Contouring Mode (Cutting Mode) :
- Setting Stroke Limit:
- Return from Reference Point:
- Move Reference from Machine Datum:
- Modifiers
- Block Separators
- Tool Offset Modification
- Expressions and Functions
- System Variables
- User Variables
- Variable Programming (Parametric Programming)
- Probe Move (G31)
- Conditional Statements
- Short Form Addressing
- Logical and Comparative Terms
- File Inclusion
- 11.5 Four Axis Programming
- Software Update
- Off-Line Software
3500i xxiii
Tool Table ............................................................................................................ 325
Setting up the Tool Table................................................................................ 327
Importing a Tool Table .................................................................................... 327
Exporting a Tool Table..................................................................................... 327
Tool Paths ............................................................................................................ 328
Creating a Tool Path in CAM Mode ................................................................ 328
Tool Path Verification ...................................................................................... 328
Tool Path Editing............................................................................................. 329
Use Existing Shape......................................................................................... 329
Editing a Tool Path .......................................................................................... 330
Disabling, and Enabling Tool Paths ................................................................. 330
Deleting Tool Paths......................................................................................... 330
Arranging Tool Paths Sequence...................................................................... 330
Smart Programming........................................................................................ 331
Files Created................................................................................................... 331
CAM Example 1................................................................................................... 332
Exercise One:.................................................................................................. 332
Defining Geometry:......................................................................................... 332
Connecting the Geometry:.............................................................................. 334
Finalizing the geometry................................................................................... 335
Creating the shape.......................................................................................... 336
Creating the tool paths:................................................................................... 337
CAM Example 2................................................................................................... 341
Example Two: ................................................................................................. 341
Create Circle Geometry: ................................................................................. 341
Create Line Geometry..................................................................................... 343
Finalizing the geometry................................................................................... 344
Creating the shape.......................................................................................... 345
Creating the tool paths:................................................................................... 346
G-Code Edit, Help, & Advanced Features
11.1 G-Code Program Editing
Activating Edit Mode ........................................................................................... 352
Program Edit Screen............................................................................................ 353
Program Edit buttons...................................................................................... 354
Edit Features menu......................................................................................... 355
Preview Features menu.................................................................................. 356
Program Editing ................................................................................................... 357
Mark a program block: .................................................................................... 357
Unmark a block, or blocks:.............................................................................. 357
Delete a Character: ......................................................................................... 358
Deleting a program block:............................................................................... 358
Inserting a program block: .............................................................................. 359
Copy/Paste Blocks in a program ..................................................................... 359
Moving Blocks in a program ........................................................................... 360