Manual
Table Of Contents
- Controls of the 3500i
- Manual Information
- Introduction
- Machining Fundamentals
- Manual Data Input
- Tool Management
- 4.1 Tool Table
- 4.2 Tool Data
- Program Management
- Conversational Editing
- Programming: Canned Cycles, sub-programs
- 7.1 Explaining Basic Cycles
- Round/Chamfer
- Rapid
- Line
- Arc
- Dwell:
- Plane Selection
- Reference Point Return:
- Fixture Offset (Work Coordinate System Select):
- Unit (Inch/MM)
- Dimension (Abs/Inc)
- Absolute Zero Set
- Block Form
- Temporary Path Tolerance
- System Data
- FeedRate
- FeedRate (4th-Axis)
- Spindle RPM
- M - Functions
- Tool Definition and Activation
- Repeat Blocks
- 7.2 Canned Cycles
- 7.3 Probing Cycles
- 7.4 Sub-programs
- 7.1 Explaining Basic Cycles
- Drawing Programs
- Running a Program on the Machine
- CAM: Programming
- 10.1 CAM Programming
- CAM Mode
- Recommended CAM Programming Sequence
- CAM Mode Mouse Operations
- CAM Mode Screen
- Activating CAM Mode
- Creating a New Program
- Tool Path Data Input
- Quick Coordinate Entry
- Job Setup: Basic tab
- Job Setup: Advanced tab
- Comment Tab
- Block Form: Basic tab
- Comment Tab
- Drilling Cycle:
- Drilling dialogue:
- Mill Cycle
- Pocket Cycle
- Pocket Finish Cycles
- Engraving Cycle
- Program Directive
- Modifying Toolbar
- Viewing Tools
- CAM Mode buttons
- CAM Setup
- Geometry
- DXF Import Feature
- Modifying Tools
- Shapes
- Tool Table
- Tool Paths
- CAM Example 1
- CAM Example 2
- 10.1 CAM Programming
- G-Code Edit, Help, & Advanced Features
- 11.1 G-Code Program Editing
- 11.2 G-Code and M-Code Definitions
- 11.3 Edit Help
- 11.4 Advanced Programming
- SPEED
- M - Functions
- Order of Execution
- Programming Non-modal Exact Stop:
- In-Position Mode (Exact Stop Check):
- Contouring Mode (Cutting Mode) :
- Setting Stroke Limit:
- Return from Reference Point:
- Move Reference from Machine Datum:
- Modifiers
- Block Separators
- Tool Offset Modification
- Expressions and Functions
- System Variables
- User Variables
- Variable Programming (Parametric Programming)
- Probe Move (G31)
- Conditional Statements
- Short Form Addressing
- Logical and Comparative Terms
- File Inclusion
- 11.5 Four Axis Programming
- Software Update
- Off-Line Software
3500i xix
7.3 Probing Cycles
Tool, and Spindle Probe cycles............................................................................ 199
Tool Probe Cycles ................................................................................................ 200
Tool Probe Calibration Cycle ........................................................................... 201
Tool Length and Diameter Offset Preset........................................................ 203
Manual Tool-Length Offset Preset.................................................................. 210
Manual Tool Diameter Measure for Special Tools.......................................... 213
Tool Breakage, Length and Diameter Wear Detection .................................. 216
Spindle Probe....................................................................................................... 219
Spindle Probe Cycles ...................................................................................... 219
Spindle Probe Settings.................................................................................... 219
Spindle Probe Calibration Cycle ...................................................................... 220
Edge Finding ................................................................................................... 222
Outside Corner Finding .................................................................................. 223
Inside Corner Finding ..................................................................................... 225
Inside/Outside Boss/Hole Finding .................................................................. 227
Inside/Outside Web Finding ........................................................................... 229
Protected Probe Positioning .......................................................................... 231
Skew Compensation ...................................................................................... 232
Using the Z Work Offset Update Feature....................................................... 235
7.4 Sub-programs
Sub-program information: .................................................................................... 236
Overview......................................................................................................... 236
Ending the Main Program ............................................................................... 236
Defining a sub-program ....................................................................................... 237
Ending a sub-program.......................................................................................... 237
Calling a sub-program .......................................................................................... 237
Looping a sub-program ........................................................................................ 238
Rotate, Mirror, and/or Scale a sub-program......................................................... 239
Pocket and Islands example ................................................................................ 241
Pocket/Island example 1................................................................................. 241
Pocket/Island example 2................................................................................. 243
Pocket/Island example 3................................................................................. 245
Pocket/Island example 4................................................................................. 247
Pocket/Island example 5................................................................................. 249
Pocket/Island example 6................................................................................. 251