User`s manual

200S 41
I - 3 Milling Specific Operations
Incline, and Arc Milling
This section describes the Incline Mill, and Arc Mill tables, and
capabilities. The 200S provides storage of 1 user definable pattern
each for Incline Mill, and Arc Mill. Once patterns are defined, they are
remembered when power is cycled. They can be recalled, and
executed from the DRO until removed.
The View Graphic enables verification of the pattern before any
machining is started.
To access the Incline or Arc Mill forms, press the FEATURE soft key,
then press the INCLINE MILL, or ARC MILL soft key to open the
corresponding form.
Soft Key Functions
The following soft keys are available while in the Incline or Arc Mill
forms.
Function Soft key
Press to access the FEATURES soft keys.
Press to access the Incline Mill Table.
Press to access the Arc Mill Table.
Press HELP for additional information about
the pattern.