Specifications

8
Functions
– Hole Patterns (VUE, 200S, 300S)
– Programming of Machining Steps (300S)
Automatic calculation of bolt hole
patterns for milling and drilling
In milling machine mode you can machine
bolt hole circles (full circle or circle
segments) and linear hole patterns
without having to calculate: You simply
enter the geometric dimensions and the
number of holes from the drawing. The
display calculates the coordinates of the
individual holes in the working plane. You
only need to traverse “to zero” and drill.
Then the display shows the next position.
The graphic display is a particularly useful
feature: it lets you verify your input of the
programmed bolt-hole pattern before
machining.
Programming machining steps
300S programming functions allow you to
save repetitive machining steps. Thus for
example you can save all of the machining
steps required as a program for a
workpiece in a small-batch. In the RUN
mode of operation, the distance-to-go
display will guide you step-by-step to the
programmed positions.
You create programs by typing in the
positions step by step. The fi xed cycles
such as Bolt Hole Circle, Linear Hole
Pattern, Incline Mill Form or Circular Arc
keep your programs short and save you
programming time. In the course of your
work, the readout presents each nominal
position in the proper sequence. You need
only move from one position to the next.