Specifications

7
– Distance-to-Go Display (VUE, 200S, 300S)
– Contour Monitoring (VUE, 300S)
Distance-to-go display for turning
and milling
The distance-to-go display feature
simplifi es your work considerably: you
enter the next nominal position, and the
display shows you the distance remaining
to the target position. This means, you
simply traverse to the display value zero.
The displays for milling can also
compensate the cutter radius. In this way
you can directly use the drawing
dimensions without having to do any
conversions. You no longer have to
remember any complicated values.
300S, VUE:
Contour monitoring for overseeing
manual 2-D operations
Special functions enable you to run 2-D
milling and turning operations with a
manual machine. The contour monitoring
function shows you whether you are
moving the tool near to the defi ned
contour.
The distance-to-go display is enhanced by a
“near zero” message: As you traverse to
zero, a square cursor moves into a target
fork. The “near zero” message is
confi gurable per axis.